Kirby Morgan KM Diamond Stainless Steel Diving Helmet

طلب خاص

يشحن بشكل عام خلال 7 إلى 14 يومًا ، حسب التوفر

Special Order

Generally ships in 7-14 days, subject to availability

Kirby Morgan products are available to end users only.



The SuperFlow® adjustable demand regulator provide low inhalation resistance and high gas flow letting the diver breathe easier and work harder. This mask comes standard with the large tube SuperFlow® 350 regulator.

The Side Block Assembly of both the BandMask® 18 and 28 receives the umbilical over the shoulder in the B configuration. They both come standard with the Tri-Valve® exhaust system, and the new BandMask® BandKeepers®. 

The Tri-Valve® Exhaust System has less breathing resistance than the older single valve exhaust. It retrofits to all previous Kirby Morgan BandMasks®. The BandMask® BandKeepers®, coupled with the redesigned hood, not only prevent any separation of the hood from the mask, but also make it impossible for the bands to separate from the mask.

The communications connections can be either a male waterproof "plug in" type or bare wire posts.The BandMask® 28 is very similar to the BandMask® 18. Many parts on the BandMask® 18B are interchangeable with the BandMask® 28B. The major difference between the 18 and 28 is the material of the mask frame. The BandMask® 18 has a hand laid fiberglass frame (yellow) while the BandMask® 28B frame is an extremely durable injection molded plastic (black). The relative ease of production of the BandMask® 28 frame allows for a lower cost and quicker delivery of this mask. Other differences include: 1) The main exhaust body of the BandMask® 28 is part of the frame itself and uses a #545-041 main exhaust cover 2) no comfort insert is required on the "28" 3) the face ports for the 18 and the 28 differ slightly in size.

CE Certification:

The BandMask® has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 15333-1:2008/AC:2009 (Class C). It is fully CE marked with demand regulator SuperFlow® 350 and oral nasals P/N 510-690 and P/N 510-747 (now standard).

Features:

• 
• 
  
• SuperFlow® 350 Regulator
• This all metal, fully adjustable, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low pressure compressors.
•  
• 
  
• Air Train
• The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
•  
• 
  
• Defogging Steady Flow Valve
• Provides an additional flow of gas into the helmet for ventilation and defogging.
•  
• 
  
• Emergency (EGS) Valve
• Supplies backup breathing gas to the diver.
• 
• 
  
• Head Harness (Spider)
• Keeps the mask in place on the divers head. The neoprene rubber spider has adjustment holes for varying the tension of the harness.
•  
• 
  
• Gas Supply Non-Return Valve
• Prevents loss of gas pressure in the event of umbilical damage, preventing a "squeeze".
•  
• 
  
• Nose Block Device
• Allows the diver to block the nose to equalize ears.
•  
• 
  
• Communications
• Communications are “non-modular” (like the SuperLite 17B helmet). When ordered with male waterproof connector (for 4 wire communications), the mask also includes bare wire posts. When ordered with bare wire posts (for 2 wire communications), the port for the mwp connector is plugged.
• 
• 
  
• Stainless Steel Bands
• Bands hold the Hood/Face seal in place on the mask frame. They also provide the mounting studs for the Head Harness (Spider).
•  
• 
  
• Side Block
• Multi use side block has additional ports built in to provide controlled air flow, if needed.
•  
• 
  
• Silicone Oral Nasal Mask
• Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
•  
• 
  
• T ri-Valve® Exhaust with Whisker Wings
• Retrofits to many previous Kirby Morgan Helmets and BandMasks®, has less breathing resistance than the older single valve exhaust while providing an extremely dry hat. The Tri-Valve® Exhaust is made of a chemical resistant compound.

• Weight: KMB 18 - 13.63 pounds 
• Mask Frame: Fiberglass, polyester resin, polyester gel coat, and carbon fibers Mask Frame
• Control Knobs: Polyurethane
• Face Port/Lens: Scratch Resistant Polycarbonate
• Hood: Neoprene
• O-Rings: Buna-N
• Recommended Lubricants: Christo-Lube®, Dow Corning® MS4 Silicone Lubricant. Krytox® and Halocarbon® are also acceptable.
• Regulator: SuperFlow® 350 Performance. The SuperFlow® 350 regulator on the Kirby Morgan 18 & 28 masks offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
• Cage Code: The cage code for identifying KMDSI products for U.S. government purposes is 58366.
• CR Standards: These full face masks meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
• CE Approved: The SL27 helmet is CE Approved.
• Temperature Limitations: Use at water temperatures below 33 °F (1 °C) requires use of hot water shroud (P/N 525-100) and hot water. 
• Operational Specifications & limitations:Umbilical minimum I.D. 3/8” (9.5 mm) of not more than two sections, total length not to exceed 600 feet (183m). This mask meets or exceeds all requirements of NPD, Health and Safety, (U.K.), United States Navy, ADCI United States and is CR rated by Dive Lab, Panama City, Fla., USA. Recommended overbottom (OB)gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g.

• KMB Bandmask 18B Full Face Diving Mask- Part # 500-025 (POSTS) or 500-026 (MWP)
• Logbook w/ pen- Part # 125-001
• Helmet/Mask Bag- Part # 500-901
• Tool Kit with Pouch- Part# 525-620
• Current Certification
• Test Specifications