Description
- High precision ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter.
- An easy to use I2C ADC Converter, with Programmable Gain Amplifier.
- Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins.
- Wide voltage supply range: 2.0V to 5.5V, operate in a comparator mode which is helpful for maintaining accuracy.
- Single-Shot Mode: Auto Shut Down; Programmable data rate: 8sps-860sps.
- Imported from USA.
Description:
For microcontrollers without an analog-to-digital converter or
when you want a higher-precision ADC, the ADS1115 provides 16-bit
precision at 3300 samples/second over I2C. The chip can be
configured as 4 single-ended input channels, or two differential
channels. As a nice bonus, it even includes a programmable gain
amplifier, up to x16, to help boost up smaller
single/differential signals to the full range. The chip's fairly
small so it comes on a breakout board with ferrites to keep the
AVDD and AGND quiet. Interfacing is done via I2C. Simply connect
GND to ground, VDD to your logic power supply, and SCL/SDA to
your microcontroller's I2C port and run the example code to start
reading data.
Parameters:
ADC Bit rate: 16 Bit
Interface Type: I2C
Channels: 4 Channel AN0 AN1 AN2 AN3
Input voltage: 2.0v-5.5v
Channel input voltage : 0-VDD
Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut Down
Programmable data rate: 8sps-860sps
Input range programmed control, 7 types input ranges:
-0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,
-2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V I2C
7-bit addresses between 0x48-0x4B
