كشاف UC35 من Fenix الإصدار 2.0

PRODUCT OVERVIEWThe Fenix UC35 V2.0 rechargeable flashlight is the 2018 upgrade to the Fenix UC35 flashlight. Fitted with the Cree XP-L HI V3 LED, this light delivers a maximum 1000 lumens at a distance of 873 feet (266 meters). Tuthe light and off with the tactical tail switch and cy thgh the six lighting modes via the newly designed metal side switch—which also has a built-in battery level indicator. Ycan achieve an incredible 800 hs of time when using the new mlight brightness level. Compact and built-th, the Fenix UC35 V2.0 flashlight is IP68 rated; dust pf and waterpf underwater to tmeters.

2018 upgrade impements r prior Fenix UC35:-XP-L HI v3 LED pides greater brightness, efficiency and throw-Imped stainless steel side switch with battery level indicator-New body design is more pact-Indes higher capacity 3400 mAH rechargeable battery for ler time-USB port imped to charge faster and is easier to activate-Imped waterpf and dust-pf rating (IP68)

SPECIFICATIONSMax Lumens: 1000Max Beam Distance: 873 feet (266 meters)Max Runtime: 750 hsLighting Modes: 5Bulb Type: Cree XP-L HI V3 LEDSize: Length: 5.5” (140mm) Body: 0.9” (23.5mm) Head: 1.0” (25.4mm)Weight: 3.1 oz. (89g) weight exding batteriesBattery: One rechargeable 18650 Li-ibattery (inded) or tCR123A batteries. NOTE: The light will not k with flat-top 18650s. We remend any of the ARB-L18 series f Fenix for backup or replacement.Inded: As of Sept. 7th, 2021: ARB-L18-3400 Li-ibattery, Micro-USB charging cable, body clip, spare rubber switch b, lanyard, holster, tspare O-rings

Additil Features of the Fenix UC35Cree XP-L HI V3 LED, with lifespan of 50,000 hsPowered by 18650 rechargeable Li-ibattery or t3V/CR123A Lithium batteries5V/2A MicUSB rechargeable, inded 18650 rechargeable Li-ibatteryBattery level indicatiand low-tage warning functionDigitally regulated put maintains stant brightnessReverse prity pectito pect f improper battery insertionAnti-l and anti-slip body designTactical tail switch features instant activationFunctil side switch for put selectionMade of durable high-strength and oxidation-resistance aluminumPremium type HAIII hard-anodized anti-abrasive finishThened ultra-ar glass lens with an anti-reflective ting

Operating InsttionsSwitchesThe tail switch is the tactical switch, and the side switch is the functil switch.

ON/OFFTap

Tap the tactical switch to mntarily tuthe light; release it and the light will go .

Fully press

Fully press the tactical switch to stantly tuthe light; press e again to tuoff the light.

Output SelectionWith the light switched on, single click the functil switch to cy thgh Turbo→Mlight →Eco→Low→Med→High.

StrobeWith the light switched on, press and hold the functil switch for 0.5 seds to enter strobe, click e again to retuto General mode.

B-up Battery Level IndicationEach time the light is tud on, the battery level indicator will auttically display the battery status for 3 seds.

Green stant on: saturatedGreen flashes: sufficientRed stant on: pRed flashes: criticalNote: There is no indicatiwhen CR123A battery is used.

Intelligent Memory CiitThe light memorizes the last selected brightness level General mode. When tud again the previously used brightness level will be recalled.

Intelligent PectionThe light will amulate a lot of heat when king at Turbo mode. When the light is rheated up to 60°C or ab, the flashlight will auttically step doa few lumens to reduce the temperature; when the temperature is lower than 60°C the put will gradually retuto Turbo put level.

Low-tage WarningWhen the tage level drops below 3V, the flashlight is prammed to downshift to a lower brightness level until Mlight put is reached. When this happens in Mlight mode, the battery level indicator will flash red to remind yto replace the battery. To ensure nol use, the flashlight will k until the battery s or the battery r-discharging pectiactivates.

Note: The low-tage warning y ks with rechargeable Li-i18650 battery, not with disposable CR123A's.

ChargingTuoff the light. Plug the USB side of the charging cable into any USB power supply. Uner the dust er of the light, and plug the MicUSB side of the charging cable into the charging port of the light.The battery level indicator displays red while charging and turns to solid green when charging is plete. The nol charging time of the inded Fenix ARB-L18-3400 is ab 3.2 hs.Once charging is pleted, be sure to rem the charging cable and replace the dust er to pect against dust and foreign objects.Recharge a stored light every f mhs to maintain optimum perfonce of the battery.Only Low put can be used while the light is being charged, but charging time will be ped.Battery ReplacementUnscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw the tail cap back on.

Usage and MaintenanceDisassembling the sealed head can cause damage to the light and will void the warranty.Fenix remends using an excellent quality battery.If the light will not be used for an extended period, rem the battery, or the light ld be damaged by electyte leakage or battery explosion.Unscrew the tail cap half a tuor take the battery to prevent accidental activatiduring storage or transportation.L-teuse can result in O-ring wear. To maintain a proper water seal, replace the ring with an apped spare．Periodic aning of the battery tacts impes the lamp's perfonce as dirty tacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the fowing reasons:A: The battery needs replacing.

Stion: Replace battery (Ensure battery is inserted arding to the manufacturer’s specifications).

B: The threads, PCB board tact or other tacts are dirty.

Stion: Clean the tact points with a tswab soaked in rubbing alcohol. If the ab methods don't k, please tact y authorized distributor.

Warning This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into any’s eyes.

ss="aligncenter size-full wp-image-31664" s" alt="" width="900" height="675" />