مفتاح IP ذكي من kuwifi-WiFi ، 8 منافذ ، Mbps ، معيار POE ، حاقن RJ45 ، مبدل لكاميرا IP ، لاسلكي AP ، CCTV

Product Description:

1.48v PoE switch provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable.

2.100mbps switch can be used for any 10/100Mbps link and supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power to 802.3af end devices

3. PoE 48V switch automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink. Easy to operate and reliable.

4. PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access point, IP phones, office access control systems, and other PD devices and offers a line of high quality products that provide a total solution for Ethernet application in different environments.

Detail

Product Name:10 Port 10/100M POE Switch(8+2)

PoE Output Power:15.4W/30W

Connector:8*10/100mbps POE port////2*10/100/100mbps UP-Link port

Network Medium:Cat5 (UTP) or more

Network Standards:

IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX

IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet

PoE power:15.4W per port(IEEE802.3af).

Backboard Bandwidth:2G

Power:Input52V DC input

Operating temperature:-10-55℃(32-104℉)

Storage temperature:-40-70℃(14-158℉)

Package Listing

1*poe switch

1*DC Power

1*English Manual

Please Notes:

1. Using high-quality network cables

The quality of network cables is crucial to the success or failure of PoE power supply. Generally, it is recommended to use Category 5 network cables, Category 5 or above network cables, and Category 6 network cables. The internal material is also very important. Do not use aluminum wire, copper clad aluminum wire, copper clad iron wire, iron core wire, etc., and use pure copper wire is the most suitable.

2. Within a distance of 80 meters

In theory, the power supply distance for PoE is 100 meters, but considering the quality of market network lines and the impact of the environment, the actual power supply distance used should be kept within 80 meters as much as possible.

FAQ:

Q1: After the computer is directly connected to the router, the Internet can be accessed normally, but the computer cannot access the Internet when it is connected to the router through the network switch?

A1: After connecting to the network switch, the computer cannot access the Internet. The reasons for this may include: unstable physical connection, improper computer settings, etc. Please follow the steps below to eliminate:

1) Replace the network cable between the computer and the switch to ensure that the corresponding indicator light of the switch is on and the local connection is stable. Checking method: Connect two computers to the switch and set them on the same network segment. If they can ping each other, the connection between the computers and the switch is stable.

2) Set the computer's local connection to obtain IP automatically (provided that the front-end router enables the DHCP server), right-click the local connection properties, select Internet Protocol (TCP/IP), and click the Properties button.

3) Check "Obtain an IP address automatically", then OK.

4) When the computer obtains the IP normally, it can surf the Internet normally.

5) If you still cannot access the Internet after obtaining it normally, please check the relevant settings of the front-end router to see if the computer is blocked from accessing the Internet.

6) If the IP address cannot be obtained normally, replace the network cable between the switch and the router.