A material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other Yisheng nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.
Filament Properties Table
3D PRINTING FILAMENT: ePAHT-CF
Density(g/cm3): 1.4
Heat Distortion Temp(℃,0.45MPa): 190
Melt Flow Index(g/10min): 19.68(270℃/2.16kg)
Tensile Strength(MPa): 173.37
Elongation at Break(%): 8.93
Flexural Strength(MPa): 171.64
Flexural Modulus(MPa): 5612.41
IZOD Impact Strength(kJ/m2)12.74
Durability: 10/10
Printability: 8/10
Recommended printing parameters
Extruder Temperature(℃): 260 – 300℃
Recommended temperature280℃
Bed temperature(℃): 45 – 60°C
Fan Speed: 0%
Printing Speed: 40 – 100mm/s
Heated Bed: Optional
Recommended Build SurfacesMasking paper, PVP solid glue, PEI
Feature
Flexible——
Elastic——
Impact Resistant√
Soft——
Composite√
UV Resistant——
Water Resistant——
Dissolvable——
Heat Resistant√
Chemically Resistant√
Fatigue Resistant——
Need drying√
Heated Bed Required——
Print recommendDrying at 70℃/>12h, using hardened steel, ruby nozzle
