Portafilter holder for the scale and Niche grinder and Eureka with the same 3D descent holder mechanism

Note: The description of "all" our products is a personal effort from Coffee Consumer Store that takes hours, days, experiences, and extensive research lasting several months, so we do not allow copying or attributing it to others. Thank you for your understanding.________Portafilter holder 3D to facilitate the process of weighing the portafilter on the scale after grinding, or to attach it to a Niche Zero grinder for grinding directly into the portafilter, similar to the descent espresso holder mechanism. It can also be attached to a Eureka Single Dose grinder, but it is preferable to choose the higher size for it. Also, when used with a Eureka grinder, double-sided tape should be used to fix the product; not with a screw like the Niche grinder. Product size: Fits many types of 58mm size portafilters and comes in two sizes: the lower size fits open portafilters, and the higher size fits spout portafilters, and the higher size can also be used with open portafilters. Note: There is free return if the correct option of the product is ordered and it does not match the type of your 58mm portafilter. Product features: Can be used on the scale to facilitate checking the amount of ground coffee when transferring to the portafilter. Comfortable during preparation, allowing the portafilter to be placed on it during distribution and clumping ((not during tamping)). Can be easily attached and detached from the Niche Zero grinder directly onto the portafilter from the grinder. Also suitable for use with the Niche cup if you want to grind into the Niche cup instead of the portafilter. The screw gap of the Niche grinder is approximately a centimeter, which allows you to control the fixation of the holder with the weight that suits your portafilter. Content of the shipment: Portafilter holder, a removable and attachable piece at the end of the holder to make it compatible with the largest possible number of portafilter types. Some portafilter types require the presence of this piece, while others require removing it. How to attach it to a Niche Zero grinder: The installation process takes less than two minutes and is as follows: open the screw at the bottom of the Niche's circular base where the cup is placed using the key/screwdriver that comes with the grinder. place the holder at the desired weight and tighten the screw on it. How to attach it to a Eureka Single Dose grinder: it is preferable to choose the higher holder, not the lower, because the space between the grinding and the base is higher in Eureka, unlike in Niche. Use any double-sided adhesive tape (called double tape). Fix it to the bottom of the holder, then place it on the grinder. Product negatives and solutions when used as a holder for Niche or Eureka grinders: When grinding directly on it from the grinder, some coffee may scatter on the grinder because the distance between the grinding and the portafilter is not short, and the degree of scattering varies with humidity and the type of coffee used. To avoid coffee scattering, you can do the following: steam the coffee with one puff of water before grinding to reduce static electricity, which causes scattering. Or use a coffee collection ring (dosing funnel) to limit spillage, preferably a long one like the size shown in the product images. If you are using the higher size for an uncovered portafilter, a short coffee collection ring like a Barista Space ring, for example, is sufficient.__________ Satisfaction Guarantee: The customer has the right to request a free return within 3 days of product arrival if dissatisfied or if the size does not match their portafilter type. Return method: contact us via WhatsApp with the order number and request a return. A free return shipping label will be created and sent to the customer, who must deliver the product and the label to the shipping office. The customer will be compensated with the product value upon its arrival at the store.------------------------- Shipping and Delivery: Inside Jeddah city: order processing and delivery or self-pickup within approximately 18 to 48 working hours. Other cities in the Kingdom: shipped within 18 to 48 working hours, and delivered within 1-4 working days after shipping. Note: Working days and hours do not include weekends.