Apeks XTX50 DST Stage 3 Regulator Set

The Apeks XTX50 Stage 3 Regulator Set includes the XTX50 DST regulator and XTX50 Octopus for a complete high performance and cold water rated regulator set.

The DST first stage uses an over-balanced diaphragm design, is environmentally sealed and it is fitted with two high pressure, and four low pressure ports, which are placed in angles that support optimised hose routing.

The XTX50 is a pneumatically balanced second stage that offers great breathing performance. With diver adjustable inhalation and venturi air control and anti-bacterial mouthpiece, the second stage is full of well-thought-out features.

FEATURES:

FIRST STAGE

• Swivel turret body
• 4 low pressure ports, 4 x 3/8" UNF
• 2 high pressure ports, 2 x 7/16" UNF
• Environmentally dry sealed system
• Polished chrome finish
• Balanced for superior performance

SECOND STAGE

• Adjustable cracking control
• Integrated venturi control
• Pneumatically balanced valve design
• Micro Adjuster
• Suitable for cold water use
• Bright Chrome Finish
• Right or Left hand hose configuration
• Two shot plastic front cover
• Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)
• Nitrox and Octopus versions available

The XTX50 Octopus is our top-of-the-line Octopus in terms of features and performance. It provides the same features and performance as the XTX50 second stage and includes left / right hand reversibility. It comes with a high visibility yellow front cover and a 36” yellow hose. Suitable for cold water use (below 10 C / 50 F).

• The XTX50 Octopus has a breathing effort control knob. This allows the diver to desensitize the unit when it not being used.
• The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
• Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
• Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
• Suitable for coldwater use.
• Compatible with EAN40 out of the box.
• Pneumatically-balanced second stage results in smooth, easy breathing.
• The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
• The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
• Manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
• A silicone exhaust valve improves the breathing performance of the regulator.
• The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.