Hollis Sms75 single wing - only

The Hollis side-mounted wing SMS75 is manufactured using 1000 Denier Cordura nylon with a polyurethane outer shell and a 15mm urethane internal bladder. The SMS75 will also support rear-mounted tanks with cam slots for single tanks and grommets at 11 inches (27.9 cm) for banded doubles and reversible inflator positions. The Hollis SMS75 side-mounted wing with inflator mechanism(s) and overpressure-relief/dump valve, is a 360° elastic bungee system (removable) wing that provides 35 pounds (15.88 kg) of lift capacity. The bladder has a centrally located inflator mechanism elbow(s) to avoid tank valve/regulator interference, lower left pull dump/overpressure relief valve, and the inflator system is made from durable impact-resistant plastic with a corrugated rubber hose. The internal components and inlet quick-disconnect nipple are made from chrome-plated brass. The SMS75 side-mounted system is equipped with upper and lower cam band slots for single cylinder mounting. The SMS75 side-mounted system is streamlined designed for reduced drag and passing through confined spaces. The SMS75 side-mounted wing comes with a low-pressure 3/8" threaded quick-disconnect hose and owner's manual. Suitable for: side mounting twin or single cylinders or rear-mounted singles. 1000-Denier Cordura nylon with a polyurethane lamination outer shell. 15mm urethane internal bladder. Streamlined designed for reduced drag and passing through confined spaces. 360° degree elastic bungee system (removable). Lift: 35 lbs. (15.88 kg). Centrally-located inflator mechanism elbow(s) to avoid tank valve/regulator interference. Lower left pull dump/overpressure relief valve. Low-pressure 3/8" threaded quick-disconnect hose. Inflator and pull dump valve interchangeable. Upper and lower cam band slots for single cylinder mounting.