Seac organized set Seac Dx200 Regulator Set Dx200

Seac DX 200 is considered the best regulator if you want a versatile and lightweight regulator that provides maximum performance. The Seac DX 200 Regulator has a first stage made of polished brass with chrome finish material. The design of the first stage allows for minimal weight and size while ensuring consistent performance in difficult conditions throughout the dive. The first stage features a high-performance balanced diaphragm design with full insulation from the external environment for maximum safety and ease of maintenance. The diaphragm membrane transmits pressure changes to the internal mechanism, eliminating the need for surrounding water to enter the complex mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine, or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the deteriorating internal mechanism, impairing regulator performance. The standard diaphragm regulator allows water into the mainspring chamber so the diaphragm can perform this pressure change transmission. The first stage has 2 high-pressure (HP) 7/16" threaded ports and 4 low-pressure (LP) 3/8" threaded ports with 2 inclined at 20° and 2 inclined at 30° for proper hose routing. The second stage of X200 is an aerodynamically balanced downstream design made from techno-polymers, elastomers, with metal components and covered with luxury technology treatment for abrasion and scratch resistance. The second stage features an inhalation adjustment knob to increase or decrease inhalation effort. The second stage also includes a pre-dive/dive venturi switch to prevent free flow on the surface or when swimming into a current. The X200 also incorporates low-friction metal components in an innovative, avant-garde design. The regulator comes with a 30" (76.2 cm) 3/8" threaded low-pressure hose, owner's manual, and weighs 40.2 oz. (1140 g). SEAC set including DX200 regulator and X100 OCTO, available in the INT version. Included is a Mate Reg bag. Features: top performance, lightweight balanced adjustable regulator, pneumatically balanced downstream design, balanced diaphragm 1st stage design, sanded chrome plated forged brass body, 4 low-pressure (LP) 3/8" threaded ports: 2 inclined at 20°, 2 inclined at 30°, proper hose routing, less stress, more streamlined construction: techno-polymer, elastomers, with metal components in a cover with luxury technology treatment for abrasion and scratch resistance, low-friction metal components.