Cressi set Cressi Solid Scuba Package with Mares Puck Pro computer

Are you looking for a BCD and regulator package for the summer diving season that is high quality and economical prices? The Cressi Solid Scuba Package is exactly what you are looking for. The Solid BCD is a remarkable Jacket style BCD that provides plenty of lift. The durable BCD has two zippered pockets and multiple D-rings for storage and attachment of accessory items with two 1" (25 mm) technopolymer D-rings on the pockets. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. If used at dive facilities, a size indicator is highly visible on the right shoulder. The BCD adjustable sternum strap along with both 2" (50 mm) torso adjustment straps and waist strap are all equipped with squeeze-style side-release buckles for easy donning and doffing. The lightweight back support is rigid for proper cylinder stability but is fully padded for comfort and the ridged backpack is equipped with a grab handle for easy transport and gear donning assistance. The BCD is built to last made from 500D Cordura (exterior part) and 420D nylon (interior). The Cressi Solid BCD comes with a 3/8" threaded quick-disconnect low-pressure hose and owner's manual. The XS Compact AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver air even if there is a first stage failure. The 1'st stage has 1 high pressure (HP) 7/16" threaded port and 4 low pressure (LP) 3/8" threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator. The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes with a flow deviator that acts on the venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2'nd stage and a comfortable silicone mouthpiece for breathing comfort. The XS Compact AC2 Regulator weighs 35 oz. (994 g) with hose and comes with an owner's manual. The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2'nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator comes with a long 3/8" hose and owner's manual. The Cressi Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. For at-a-glance monitoring of air pressure, the instrument's face is divided into three different colored zones: 600 psi and below is highlighted in red with a solid bar and red stripes. If the gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, providing an additional reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue. The front glass lens is designed to act as a pressure relief valve. In case of a sudden increase in pressure inside the device, the glass rises slightly, allowing excess pressure to escape. The device is housed in a small, modern-shaped boot, made from polycarbonate and Desmopan (a thermoplastic polyurethane), materials that guarantee protection from shocks and scratches while being very lightweight. The pressure gauge housing is made of durable chrome-plated brass. The gauge boot has an attachment point for a clip or lanyard. The pressure gauge is equipped with a 7/16" threaded high-pressure hose. The tool console is made in Italy. The Mares Puck Pro Wrist Computer is a super intuitive, easy-to-use, full-featured computer that improves on the original concept. It features a larger display in a slimmer design, upgradeable firmware, and multi-gas capability. It includes all the bells and whistles: a precise stopwatch, Mares-Wienke RGBM (Reduced Gradient Bubbles Model) algorithm, special function modes for air, nitrox, and bottom time, precautionary programs setting, plan mode, backlighting, logbook, freshwater/sea water setting, residual nitrogen memory reset, user-replaceable CR 2450 lithium-ion battery, altitude adjustment up to 12,100' (3,700 m), 36-hour memory capacity, superior display readability with mineral glass crystal, 492' (150 m) depth rating, power indicators, audible alarms, watch, date, and temperature displays, 12/24 hour formats, two different gas mixtures during a single dive, metric or imperial units, ascent rate indicator and digital ascent rate indicator, quartz clock movement, durable rubber wrist strap, optional USB interface for logging dives on PC.