Lipo battery charging type C

10

Product description

TP4056 / TC4056 charging controller unit / protection IC DW01A responsible for controlling charging / discharging FS8205A charging method, constant current / voltage (CC / CV) input supply voltage 4.5 ~ 6.0 volts continuous charging current 1A product description this unit is designed for charging rechargeable lithium batteries using the constant current / voltage (CC / CV) charging method. In addition to safe charging of lithium batteries, the unit also provides the necessary protection required by lithium batteries. See below for the protective features offered by this unit. This unit is designed for charging rechargeable lithium batteries using the constant current / voltage (CC / CV) method. It is protected by DW01A protection IC responsible for controlling charging / discharging FS8205A. Charging method, constant current / voltage (CC / CV) Input supply voltage 4.5 ~ 6.0 volts Continuous charging current 1A Full charge voltage (float) 4.2 volts ± 1.5% Overcharge detection voltage 4.3 volts ± 50 millivolts Overcharge release voltage 4.1 volts ± 50 millivolts Over-discharge detection voltage 2.4 volts ± 100 millivolts Overcurrent protection threshold 3A Overcurrent shutdown delay 10 ~ 20 milliseconds Short circuit shutdown delay 5 ~ 50 µs Length 28 mm (~ 1.103 inches) Diameter 17 mm (~ 0.669 inches) Weight 1.6 grams

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌