Water and air valve solenoid key with 12-volt direct current

42

60-30%

Product description

The solenoid valve is an electromechanical device in a hydraulic circuit, uses an electric current to generate a magnetic field, and thus activates a solenoid coil that controls the opening of fluid flow in the valve. Water and air valve switch with a 12-volt DC solenoid coil (normally closed) - 1/2 inch controls the flow of fluids (liquid or air) and acts as a valve between high-pressure fluids! This fluid valve is a great addition to the automatic gardening project. There are two ports measuring 1/2 inch (nominal NPT). Usually, the valve is closed. When a 12-volt DC power source is connected to its terminals, the valve opens and water flows through it. The valve works with an electronically operated solenoid coil powered by a 12-volt DC power source. And because it is normally closed, it opens fluid flow when activated, and stops/prevents flow when the supply voltage is removed. Note: When connecting the valve in the flow pipe, the inlet and outlet directions of the valve must be observed. The valve will only operate if connected in the correct direction. Installation and maintenance are precise and reliable. The installation direction can be at an arbitrary angle. Pressure regulator valve (constant flow valve) works similarly to a water flow switch. It can not only provide a constant flow but also prevent dry burning. Suitable for fluids such as water, oil, and air. Voltage: DC12V. Operating mode: N/C, normally closed. Inlet/outlet ports: 1/2 inch to 1/2 inch, GB threaded. Response time: ON ≤ 0.15 seconds, OFF ≤ 0.3 seconds. Calibration: synchronized calibration. Pressure: 0.02-0.8 MPa. Temperature: 0-100 degrees Celsius. Estimated valve lifespan: 500,000 cycles. Flow characteristics: 0.02 MPa ≥ 3 liters/min; 0.1 MPa ≥ 12 liters/min; 0.8 MPa ≥ 35 liters/min.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌