Waterproof temperature sensor resistant to water length 1 meter DS18B20
30ر.س
Product description
This is the DS18B20 water temperature sensor probe – an original black chip (1 meter) based on the DS18B20 sensor. It is very useful when you need to measure something far away, or in humid conditions. Since it is digital, you do not get any signal degradation even over long distances. The single-wire digital temperature sensors are quite accurate (± 0.5 degrees Celsius over a wide range) and can provide up to 12-bit resolution from the onboard analog-to-digital converter. They work great with any controller using a single digital pin, and you can even connect multiple sensors to the same pin, each with a unique 64-bit ID burned into the factory to distinguish between them. Usable with 3.0-5.0V systems. When used with a microcontroller, place a 4.7 kilo-ohm resistor on the sensor pin, which is required as a pull-up from DATA to VCC line. Connections: Red: VCC / VDD Yellow / White: Data Black: GND Model DS18B20 Operating Voltage (VDC) 3 to 5.5 Operating Temperature (°C) -55 to +125 Accuracy ±0.5°C Cable Length 1 Meter Shipment Weight 0.115 kg Shipment Dimensions 7 × 5 × 3 cm
Questions you might have

