1.5 HP 220V Oxygen Production Fountain
1800.90ر.س
Product description
Oxygen fountain
This 1.1 HP oxygen fountain (oxygen generator), operating on a 380V three-phase system, is the ideal solution for large agricultural and fish farming projects suffering from dissolved oxygen deficiency in the water. It works by drawing in atmospheric air and forcefully expelling it in the form of fine bubbles, thus increasing the contact area between the oxygen and the water.
Features of the oxygen fountain
- A high-strength aquarium fountain powered by a 1.1 HP motor that runs continuously for long hours.
- Industrial voltage 380 volts is suitable for agricultural and factory environments, reducing current consumption.
- A rust-resistant structure made of anti-corrosion materials suitable for both salt and fresh water.
- Massive oxygen production generates an airflow of up to 130-150 liters/minute.
- Noise reduction design compared to traditional blowers.
- Energy saving as it operates with high efficiency in transporting oxygen in exchange for electricity consumption.
The importance of the oxygen fountain
- It prevents fish from suffocating when oxygen levels drop at night.
- High oxygen levels increase fish appetite and growth by up to 30%.
- It helps in moving the water and breaking up the surface layer to prevent the formation of algae and unpleasant odors.
- An oxygen-rich environment eliminates harmful anaerobic bacteria.
Technical specifications
- Power 1.1 horsepower (HP)
- Electrical voltage 380 volts (three phase)
- Frequency 50/60 Hz
- Maximum airflow 140-160 liters/minute
- Maximum immersion depth up to 1.5 meters
- The cable is 5 meters long (waterproof).
How to use an oxygen fountain
- Install the fountain on the edge of the aquarium or pond so that the air outlet is below the water surface.
- Connect the attached hose to the air outlet, then place the porous stone (air stone) at the bottom of the basin.
- Make sure that a 380-volt power supply is available and connected to a well-grounded safety device.
- Turn the device on using the power switch. It is preferable to use a ground fault circuit breaker for protection.
- Adjust the amount of air using the valve located in the hose line.
- Leave the device running for 5 minutes and observe the abundance of bubbles.
When to use an oxygen generator
- In hatcheries, when there are fish fry that need high oxygen levels.
- When transporting live fish in temporary tanks.
- In the summer, because warm water carries less oxygen than cold water.
- Feed immediately after feeding because fish consume more oxygen to digest food.
- In recycled water systems (RAS) as a primary source of oxygen.
Storage and preservation
- If you are going to leave it off for a long time, unplug it, clean the air stone with white vinegar, and dry the fountain thoroughly.
- Store it in a dry place away from direct sunlight and dust.
- Check the internal filters (if present) every 3 months.
- Do not wrap the power cord around the device when storing it.
Shipping and Delivery
- Order an oxygen fountain from Al Talib store now.
- We provide shipping and delivery to all parts of the Kingdom of Saudi Arabia.
- Payment is available via Tabby or Tamara.
Questions you might have

