A comprehensive controller with brushless motor, LCD display for speed, throttle set for repairing the three-wheeled electric bike, 36 volt, 48 volt, 60 volt, W bike, 45 A

Packing list: 1, controller, we are factory store and support wholesale. If you order a large quantity, please contact online customer service and we will provide you with wholesale prices. Brushless motor controller for electric bike, controller, brushless motor controller from WinXu, automatically compatible with all motors in the market. Product data sheet. Product dimensions: 215x33x80mm. Rated voltage: DC 36V 48V or 48V 64V or 60V 72V. Rated power: from from from from from from from. Rated current: 45A. Low voltage protection: 30V 42V 52V 63V. Backup power consumption: > 5mA. Housing material: 64: aluminum alloy, waterproof: IPX6. Compatible motor: brushless motor. Matching display: normal LED display and LCD display. Functions and features: very low noise: reduce ripple. Motor torque to minimum. Achieve noise-free, vibration-free, comfortable riding feeling (torque imitation). • High efficiency; field-oriented control (FOC) technology allows higher system efficiency, less heat loss, and longer riding distance. Multiple food options. Overcurrent protection, over/under voltage protection, upper limit protection, HARP protection, short circuit protection, phase wire disconnection protection, clogging protection. Flexible configurations. All functions of the controller depend on customer needs. Strong power and stable quality. Electric motorcycle/electric bike controller. Material: aluminum alloy/soft texture/IPX7 waterproof/rust-proof. Smart AI processing chip, stable operation. Automatic recognition of motor mode, automatic compatibility with all brushless motors, multiple automatic protection functions. High-power controller for stable climbing. Multiple power options available from from from from from from from from from from from from from. Strong drive motor, high climbing efficiency, high speed. WinXuTech brushless controller suitable for various electric bikes/electric scooters/tricycles. Deep waterproof resistance IPX7, not afraid of wind and rain. WniXu series controller adopts deep waterproof sealing design, resistant to water, with IPX7 rating. No worries about thunderstorms or riding in water. Pure aluminum alloy cooling shell, rapid cooling, stable operation. The controller uses pure aluminum alloy as the shell material. Scientific research shows that aluminum alloy can achieve rapid heat dissipation and cooling, keep internal temperature low at all times, and extend the service life of the controller. Small product size, large function. Made of pure aluminum alloy, using standard industrial size, compatible with more bikes/electric scooters. Wiring diagram. W control supports custom service. Please contact online customer service. General controller description and function: Please follow the steps below to connect the controller to your Ebike motor. 1. Motor A.B.C: Brushless motor, usually 3 wires (thick blue, green, yellow) and 5 hall wires (5P connector). Please connect the 3 ABC motor wires to your controller motor wires, note that the same colors are connected together. 2. Hall sensor: In the second step, connect the 6P hall sensor connector to your motor hall wire. If the connectors are not the same, you can cut the wires to connect. Note that the same color must be connected correctly. Red: 5V +. Black: 5V negative. 3. Throttle: Red: 5V + pin, White (Green): throttle signal, Black: 5V- pin. 3P male connector. Connect throttle wires to throttle connector. If your throttle connector is not the same as the controller connector, you can cut the wires to connect. Note the signal wires 5V + and -. Be careful to connect wires correctly. 4. Three-speed: Blue: high speed, Black: negative, Brown: low speed. 3P male connector. High speed: speed, medium speed: speed from. Low speed: speed from. Connect the three-speed switch wires as shown above. The controller uses medium speed when the switch is open and not connected. If your 3-speed switch connector is different, you can cut the wires to connect. Be sure to connect correctly. 5. Reverse: 2P male connector with gray and black wires. Connect to reverse switch. If your connectors are not the same, you can cut the wires to connect. This function switches the motor/electric scooter to reverse when the reverse switch is on, at low speed. 6. Low level brake: male connector with white and black wires, 2P. The controller has two brake wires, connect to right and left hand brakes. When the black and white wires are shorted, the controller cuts power to the motor. 7. Cruise: pink wire and black wires with black male and female connectors. Connect to your cruise throttle button cable. If connectors are different, you can cut the wires to connect. This feature means that when the speed is on, it remains fixed at the speed before automatic cruise. If you do not use this function, you can leave this connector unplugged. 8. Alarm: red, blue, yellow, 3 wires 4P connector. Connect to the 4P alarm connector. This is the alarm signal control connector. If you do not need this function, you can leave it disconnected. 9. Power supply alarm: red: power supply +, black: negative, red 2P female connector. This connector is the power supply for the alarm, connected to the alarm power source, used to activate the alarm. 10. Speed display: green wire connected to your Ebike/EBike LCD display wire. This function uses the phase wire to measure speed. Use a normal speed display. If your Ebike does not have this function, you can leave it disconnected. 11. Electric lock: thin red wire on the power input connector. Connect to the key lock input and the key output wire to the negative terminal. If your key lock connector is different, you can cut the wire to connect. If you do not need an electric lock for your e-bike, you can connect it directly to the + power input. 12. Power input: thick red wire: + power input, black: - power input. Thick red and black 3P male connector. Connect to the battery. Note that red is the positive terminal and black is the negative terminal. Be especially careful when connecting; do not connect the wrong + and - power inputs, or you will damage the controller. Pay close attention to this step. 13. Automatic detection (learning): white wire connector. After completing all the above, leave the Ebike motor wheel hanging. Turn on the key lock and power input, and short the automatic detection wire for 10 seconds while the controller scans the motor parameters. After 10 seconds, disconnect the automatic detection. If the motor runs in the reverse direction, reconnect the automatic detection cable for another 10 seconds to re-scan and determine the correct motor direction. After this process, all connections are complete. You can use your electric bike normally. 14. High-level brake: if your electric scooter uses high-level brakes, you can use high-level brakes and disable low-level brakes. If you order a 24V/36V W controller, please refer to the W controller link for usage instructions. ● Product size: 215x43x85mm ● Voltage: 36V/48V or 48V/64V or 60V/72V ● Power: from from from W ● MOS: 18 ● Current: 45A ± 1A ● Low voltage: automatic ● Function: two three speeds/cruise/EABS. Product process display. WinXuTech controller size features: 1. The controller body is made of aluminum alloy with a groove design, which can protect the internal circuit and is good for heat dissipation to prevent thermal overload. 2. This item is a brushless motor controller, capable of providing constant speed, sensitive brake control, and direction changes. Dual-mode controller operates smoothly and quietly. 3. Wires and interfaces are durable, ensuring low failure over long-term use. 4. Interfaces have instruction labels for easy installation. 5. Suitable for electric bikes, scooters, etc. 1. When will you deliver the goods? ● We ship from China, and the warehouse will receive the goods and start shipping to your country within 1-3 business days. 2. Is the controller compatible with my motors? ● Compatible with all brushless electric bike/scooter motors, as long as your motor is brushless, the controller will be fully compatible. 3. If I cannot connect the wires, will technical support be provided? ● Of course, we always provide technical support to all customers. Please contact online customer service and request technical support. 4. Does your store support wholesale controllers? ● Yes, we are the factory store and the original manufacturer. We will offer wholesale prices for bulk orders. 5. Do you sell other electric bike accessories? ● Yes, we sell many electronic accessories for electric bikes, including controllers, chargers, BMS, alarms, throttles.