Smart copier with remote control, transmitter, 4 buttons, electric garage door, gate, remote cloning, MHz, from 1 to 10 Hz

5 pieces fixed code remote control 4 buttons 433 MHz remote control universal replacement for gate, garage door 433 MHz remote control copier 4 buttons clone version fixed code remote control for gate, garage door opener Specifications: Product size: 55*30*15 millimeters / 2.17*1.18*0.59 inches Operating frequency: 433 MHz Remote control distance: 100 meters (in open environment) Working method: clone type Power supply: 12V DC Operating current: 14 milliamps Working environment: -15℃~+75℃ Application: remote control for electric door, retractable door remote control, garage door remote control, motor remote control, curtain remote control, car and motorcycle remote control, etc. Operation method: 1. Pairing the code (learning) Place the original remote control and the clone remote control as close as possible, first press the button on the original remote control, and immediately after the indicator light turns on, press and hold the button on the clone remote control for about three seconds, the LED indicator will flash 3 times then flash quickly, indicating the original remote control code has been successfully learned. Other buttons are learned in the same way. 2. Clearing the code Press the unlock button and the lock button at the same time for two seconds, and the LED light will flash 3 times. At this time, continue pressing the lock button, then release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light will flash quickly. The code has been cleared. To test if the code has been successfully erased: after the clearing procedure, press any button on the clone remote control. If the LED indicator does not flash immediately, but flashes after two seconds, it means the original remote control code has been fully erased. If the LED continues to flash quickly immediately, the code is still present and needs to be erased again. 3. Restoring the erased code The clone remote control has a recovery function. If you accidentally erase the code of the normal clone remote control during use, you can press the power and mute buttons (the next two buttons) on the remote control at the same time. After about three seconds, the LED indicator will flash 3 times. It then flashes quickly, indicating the erased code has been successfully restored. Precautions: 1. Before using our clone remote control device, first erase the existing code of your current remote control. 2. The self-learning remote control copying tool cannot copy rolling codes, such as HCS301. Note: 1. Slight size differences may occur due to manual measurement and different measuring tools and methods. 2. The actual color of the product may not reflect in the picture due to lighting, shooting angle, and display differences. 5 × remote control copying tools