9imod RC servo 35 kg 45 kg 25 kg 51 kg waterproof resistant metal brushed motor reinforced for RC servo 1/10 1/8 Traxxas TRX4 axial SCX10 RC car

Features: 1. Digital gear support: equipped with stainless steel gears, full CNC aluminum structure, less noise, lightweight. Double ball bearings. Excellent linearity, precise control. 2. Widely used digital support motor: 35kg, 25kg, 20kg, 15kg optional, RC steering servo compatible with Clawer truck scale 1/8, 1/10, 1/12, Arrma Typhon, Traxxas Rustler nitro 4x4 VXL, SCX10, Kyosho Inferno GT2, Baja car/robot/boat remote control models and others. 3. Waterproof servo: the water protection level is IP67, the servo is 0.15-1 meters from water surface for 60 minutes, and the product performance will not be affected. 4. Controllable angle range: from 0 to 180 / 270 degrees optional, meets your different needs. 5. Standard size high-speed RC servo: 1.57 × 0.78 × 1.57 inches (40 × 20 × 40 mm); weight: 2.7 ounces (80 g). Description: The 9imod Metal Gear Digital Servo is a high-speed RC device, with large torque and water resistance level IP67, using DC motor. Compared to ordinary servos, the speed is much faster and the response is also quick, with a high voltage operating range. This is a good accessory for crawling boat robots, RC truck cars, and DIY model toys! Specifications: Brand: 9imod Model: DS35MG, DS25MG, DS20MG, DS15MG optional Control angle: 180°/ 270° optional Color: black Gear material: metal gear Gearbox material: full aluminum casing Control system: PWM control (1500usec at central point) Operating voltage range: 4.8V - 8.4V Storage temperature range: -30℃～80℃ Operating temperature range: -20°C~ +60°C Travel: 60°±1 Limit angle: 180°± 1/270°± 1 Circuit: > 80000 times without load Direction: clockwise / pulse travel 500 → 2500 microseconds Type of servo: brushless motor Motor type: DC Voltage scale type: direct drive type Sound amplifier: digital control Water resistance performance: IP67 Ball bearing: 2BB Connector wire length: JR plug 300 mm Wire gauge: 22AWG Wire info (brown): negative Wire info (red): positive Wire info (yellow): single S Dimensions: 40x20x40.50 mm Weight: 78 grams (without servo horn) DS35MG Test voltage: 6V / 7.4V / 8.4V Idle current (at stop): 270 mA at 6V / 320 mA at 7.4V / 350 mA at 8.4V Operating speed (no load): 0.12 sec/60°@6V; 0.14 sec/60°@7.4V; 0.11 sec/60°@8.4V Continuous torque (at lock): 28 kg-cm @ 6V; 31 kg-cm @ 7.4V; 35 kg-cm @ 8.4V Operating current: 2.2A @ 6V; 2.8A@7.4V; 3.2A@8.4V Dead zone: 2uSec@6V; 2uSec@7.4V DS25MG Test voltage: 6V / 7.4V / 8.4V Idle current (at stop): 270 mA at 6V / 320 mA at 7.4V / 360 mA at 8.4V Operating speed (no load): 0.13 sec/60°@6V; 0.1 sec/60°@7.4V; 0.08 sec/60°@8.4V Continuous torque (at lock): 18 kg-cm @ 6V; 23 kg-cm @ 7.4V; 25 kg-cm @ 8.4V Operating current: 2.2A @ 6V; 2.8A@7.4V; 3.2A@8.4V Dead zone: 1uSec@6V; 1uSec@7.4V; 1uSec@8.4V DS20MG Test voltage: 6V / 7.4V / 8.4V Idle current (at stop): 270 mA at 6V / 320 mA at 7.4V / 350 mA at 8.4V Operating speed (no load): 0.12 sec/60°@6V; 0.09 sec/60°@7.4V; 0.075 sec/60°@8.4V Continuous torque (at lock): 16 kg-cm @ 6V; 18 kg-cm @ 7.4V; 21 kg-cm @ 8.4V Operating current: 2.2A @ 6V; 2.8A@7.4V; 3.2A@8.4V Dead zone: 1uSec@6V; 1uSec@7.4V; 1uSec@8.4V DS15MG Test voltage: 5V / 6V / 8.4V Idle current (at stop): 270 mA at 5V / 320 mA at 6V / 360 mA at 8.4V Operating speed (no load): 0.16 sec/60°@5V; 0.13 sec/60°@6V; 0.11 sec/60°@8.4V Torque delay (at lock): 11.2 kg-cm@5V; 13.3 kg-cm@6V; 15.2 kg-cm@8.4V Operating current: 1.9A @ 5V; 2.3A@6V; 2.8A@8.4V Dead zone: 2uSec@5V; 2uSec@6V; 2uSec@8.4V Includes: 1 × waterproof digital servo 1 × adjustable metal servo arm 1 × circular servo horn type 25T set of accessories