PSG9080 signal generator

With the modulation function, the modified waveform can be output in one channel or dual channels. Modulation is the process of adding information from the signal source to the carrier to make it suitable for transmission. It is a technique that supports voltage control adjustment, allowing control of output frequency, amplitude, and duty cycle through an external analog voltage signal to achieve a voltage-controlled scanning frequency, scan amplitude, and scan duty cycle. It has a wide range, flexible power supply, and can be operated by a portable power source with 85-264 volts AC or 5 volts DC 2 amps, suitable for outdoor use. The firmware is updated in real time and can be updated at any time to fix bugs or meet your customization needs. Press the corresponding soft key to confirm entering update mode and perform firmware update and reset by connecting to a computer. Programmable output, waveform type (such as sine, square, triangle, arbitrary, etc.), output timing and sequence can be freely set to achieve automatic operation. Product description Advantages: 1. Programmable output, waveform type (such as sine, square, triangle, arbitrary, etc.), output timing and sequence can be freely set to achieve automatic operation. 2. Firmware is updated in real time and can be updated at any time to fix bugs or meet your customization needs. Press the corresponding soft key to confirm entering update mode and perform firmware update and reset via computer connection. 3. Power supply is flexible, can be operated by a portable power source with 85-264 volts AC or 5 volts DC 2 amps, suitable for outdoor use. 4. Supports voltage control adjustment, output frequency, amplitude, and duty cycle can be controlled through an external analog voltage signal to achieve voltage-controlled scanning frequency, scan amplitude, and scan duty cycle, widely used in industrial correction. 5. With the modulation function, the modified waveform can be output in one channel or dual channels. Modulation is the process of adding information from the signal source to the carrier to make it suitable for transmission. It is a technique that changes the carrier with the signal. 6. To meet individual customer needs, four color systems are provided. You can use the number keys and knob to select the desired system color, and press the save soft key to save the selected color. 7. Supports dual-channel output with equivalent performance, which can output the same functional signals or different signals or random waveform signals at the same time; all parameters can be adjusted independently, and the phase difference between the two channels can be continuously adjusted between 0 and 359.9 degrees; signal frequency can reach up to 80 MHz, and output signals can be within 1 MHz, up to 25 volts in a minute. Custom programmable waveform signal generator PSG9080 80MHZ laboratory random wave generator for (British standard 220 volts)