Apex High Flow Push-On Chuck Tire Press Head – Direct Conversion to Year System Head

Apex High Flow Push-On Tire Inflator Head

If you are using an air compressor, the inflation nozzle is usually threaded (you need to turn it on the tire valve each time).

The problem with this type:

• It takes time to disassemble and assemble
• It causes erosion of the valve teeth.
• Sometimes air escapes during unscrewing

With Apex's High Flow Push-On Chuck, the process is reduced to just one click.

The head is mounted on the motor once, and then it is connected directly to the valve without turning .

Result:

• Blow faster
• Easier to use
• What escapes the air.

Why is this head better than regular heads?

Many traditional blower heads do not open by fully twisting the tire, so airflow is reduced.

The Apex High Flow design compresses the valve almost completely, allowing a larger volume of air to pass through, and therefore:

• Less inflation time
• Better performance, especially in four-wheel drive tires.

Features

✔️ Quick installation without twisting

✔️ High airflow

✔️ Faster tire inflation

✔️ It does not harm the teeth to wrap the tire

✔️ Sturdy, rust-resistant aluminum body

✔️ Stainless steel fixing claws

✔️ Stable, vibration-free design

✔️ Disassembleable and maintainable

compatibility

Compatible with blower compressors that use a threaded head system.

How to use

1. Attach the Apex head to the blower head on the compressor.
2. Then just press it onto the tire valve.
3. Start blowing immediately.

Without twisting or unwinding each time.

Specifications

Company: Apex Designs USA

Product Type: Push-On Air Chuck

Airflow: High Flow

Material: Hard anodized aluminum

Claws: Hardened stainless steel

Compatibility: Most portable blower compressors