UFS Confined Space Tripod & Winch Kit – USP-TP-700 + USP-WN710 (20 m Wire Rope) | UFS-USP-TP700-WN710

Overview

• The UFS Confined Space Tripod & Winch Kit brings together the two pieces a team needs to enter, work in and rescue from manholes, tanks, pits and other confined spaces: the USP-TP-700 aluminium tripod and the USP-WN710 rescue winch. The tripod is a single-point anchorage connector, certified to EN 795:2012 Type B and IS 3521 (Part 7):2021, that stands over the opening and provides an eye-bolt anchorage point with an anchorage strength above 12 kN. Its three lightweight tubular aluminium legs adjust in height from 1.2 m to 2.1 m with quick-release locking pins for tool-free setup, the aluminium head carries the pulley and anchorage, padded aluminium shoes grip the ground, and polyester webbing links the feet so the legs cannot spread under load. At 13 kg it can be carried and set up by one person, and it folds to a storage length of 1.2 m. The USP-WN710 winch, certified to EN 1496:2017 Class A as a rescue lifting device, mounts on the tripod leg with a universal zinc-plated steel mounting plate and carries 20 m of Ø 4.5 mm galvanized steel wire rope, wound by a hand crank with a nylon handle on a carbon steel body with a yellow zinc finish. Together they let a trained team raise and lower a worker, or recover an injured worker, in a controlled way, with the winch rated at 135 kg for one person. Each piece carries the CE marking and the ISI mark. The tripod is packed in a 158 x 32 x 28 cm box and the winch in a 26 x 15 x 10 cm box, and both are made in India. Available through Al-Najma Al-Wataniyah with guaranteed quality and fast delivery across Riyadh, Dammam, and all KSA regions.

Technical Specifications

Specification	Value
Category	Confined Space Equipment — Tripod & Rescue Winch Kit
Brand	UFS (UFS Protects)
Kit contents	Tripod USP-TP-700 · Winch USP-WN710
Tripod — type	Single-point anchorage connector, transportable (EN 795 Type B)
Tripod — standards	EN 795:2012 Type B · IS 3521 (Part 7):2021 (BIS licence CM/L 8700166414)
Tripod — anchorage strength	Above 12 kN
Tripod — height	Adjustable from 1.2 m (4 ft) to 2.1 m (7 ft)
Tripod — leg spread	Ø 1.9 m (6.2 ft) inside shoes · Ø 2.26 m (7.41 ft) outside shoes
Tripod — storage length	1.2 m (4 ft)
Tripod — weight	13 kg
Tripod — materials	Aluminium head, legs and shoes · stainless steel (316) pins · mild steel pulley · zinc-plated mild steel eye-bolt, quick mount bracket and locking pins · black polyester webbing
Tripod — packaging	Box 158 x 32 x 28 cm · 1 piece · 15 kg gross
Winch — type	Rescue lifting device, hand crank
Winch — standard	EN 1496:2017 Class A
Winch — rated load	135 kg (one person)
Winch — tested load	1200 kg
Winch — lifeline	Galvanized steel wire rope Ø 4.5 mm · 20 m (65 ft)
Winch — materials	Carbon steel body with yellow zinc finish · nylon plastic handle · zinc-plated steel universal mounting plate
Winch — mounting	Mounts on the tripod with its fastener
Winch — packaging	Box 26 x 15 x 10 cm · 1 piece · 9.5 kg gross
Conformity marks	CE (notified body 0302) · ISI
Country of origin	Made in India
SKU	UFS-USP-TP700-WN710 (kit) · UFS-USP-TP-700 (tripod) · UFS-USP-WN710 (winch)

Size & Color Table

Article Code	Color	Size
UFS-USP-TP-700	Silver aluminium legs · red head	Height from 1.2 m to 2.1 m
UFS-USP-WN710	Yellow zinc body · blue side cover	Lifeline 20 m (65 ft)

Documentation & Standards

• Each piece of the kit is certified to its own European standard. The USP-TP-700 tripod is certified to EN 795:2012 Type B, the standard for transportable anchor devices used as a temporary anchorage for personal fall protection, and to the Indian standard IS 3521 (Part 7):2021 under BIS licence CM/L 8700166414, shown by the ISI mark. The USP-WN710 winch is certified to EN 1496:2017 Class A, the standard for rescue lifting devices used to raise a person from a lower to a higher position. Both pieces carry the CE marking with notified body number 0302, so a safety officer can match each piece to the project specification and include it in the rescue plan.

• Additional reference standards for the Saudi market

• EN 795:2012 Type B — transportable temporary anchor devices for personal fall protection, tested for one user.

• EN 1496:2017 — rescue lifting devices, in Class A and Class B.

• EN 361 / EN 1497 — full body harnesses and rescue harnesses to be worn by the person raised or lowered.

• EN 360 — retractable type fall arresters, used as the backup fall arrest line from the tripod.

• EN 365 — general requirements for instructions, marking, periodic examination and repair of fall protection equipment.

• OSHA 29 CFR 1910.146 — permit-required confined spaces; widely used in Saudi oil, gas and industrial HSE procedures for entry, attendants and retrieval.

• SASO / SABER — personal protective equipment entering the Saudi market is registered on the SABER platform against the applicable SASO technical regulation.

Industrial Applications

• B2B Sectors — Detailed Engineering Use Case

Sector / Application	Engineering Use Case Details
Water, sewage & drainage networks	Entry into manholes, wet wells and chambers, with the tripod centred over the opening and the winch used to raise or lower the worker in a controlled way.
Oil, gas & petrochemical plants	Tank, vessel and column entry during inspection and shutdowns, with a ready retrieval system at the manway as required by permit-to-work procedures.
Utilities & telecom	Access to underground cable vaults, valve chambers and service pits by maintenance crews.
Municipal & construction projects	Shafts, pits and culverts on infrastructure projects, where a portable 13 kg tripod can be moved from one opening to the next.
Industrial plants & silos	Entry into hoppers, pits and storage spaces during cleaning and maintenance, with the winch kept rigged for rescue.
Emergency response & rescue teams	A standby rescue system at confined space entry points so an injured or unconscious worker can be lifted out quickly.

Supply Information

Field	Details
Lead Time	2-3 Business Days
Coverage	Riyadh · Dammam · Jeddah · Jubail · Yanbu · All KSA
Project Supply	Complete confined space kits for contractors, utilities and industrial plants, with tripod and winch supplied together or as separate pieces.

Frequently Asked Questions

Q1: Can the UFS winch be used as the only fall protection for a worker in a confined space?

• No. The USP-WN710 is an EN 1496 Class A rescue lifting device. A worker raised or lowered with the winch must also be connected to a separate backup fall arrest system, such as a self-retracting lifeline anchored to the tripod.

Q2: How deep can the kit reach?

• The winch carries 20 m (65 ft) of galvanized steel wire rope. Allow for the tripod height and the connection to the harness when you measure the depth of the space.

Q3: How many people can the kit hold?

• The kit is designed for one person. The winch rated load is 135 kg, which includes the worker, clothing, tools and equipment.

Q4: What size of opening does the tripod fit?

• The legs spread to Ø 1.9 m inside the shoes and Ø 2.26 m outside the shoes, so the tripod stands over most manholes and tank manways. Set it on firm, level ground with the webbing tight between the feet.

Q5: Do you deliver across Saudi Arabia?

• Yes. Al-Najma Al-Wataniyah delivers to Riyadh, Dammam, Jeddah, Jubail, Yanbu and all regions of the Kingdom, with project supply available for contractors and industrial facilities.

Internal Links

• Equipping the worker who goes in? Browse our full body harnesses.

• Need a backup fall arrest line from the tripod? Browse our self-retracting lifelines.

• Looking for more options? Browse our full confined space and fall protection range, including gas detectors.

• Setting up a confined space rescue station for a project? Contact our B2B team for a quotation.

_________________________________________________________________________________________

Copyright © 2026 — (Al-Najma Al-Wataniyah Est.) — All Rights Reserved — Kingdom of Saudi Arabia

We are committed to providing the highest quality standards for our customers in the Kingdom of Saudi Arabia; we provide approved certificates or technical data sheets for each product to ensure that your project requirements are met.