Dividing Head Sets

Main Specifications

Center height (mm): 80 / 100 / 125 / 160 depending on model.​

Spindle taper (Morse): No. 3 for models UDH80 and UDH100, and No. 4 for models UDH125 and UDH160.​

Spindle register diameter (mm): approximately 36.541 – 41.275 – 53.975 – 53.975.​

Worm gear ratio: 1:40 for all models.​

Spindle tilting range from horizontal: about ±95.5° (can tilt from horizontal past vertical).​

Position key width on table: 14 mm for models 80 and 100, and 18 mm for models 125 and 160.​

Indexing accuracy (arc minutes): 60′ for UDH80, and 45′ for the other models.​

Approximate gross weight (kg): 40 / 80 / 132 / 140 respectively.​

Features

Suitable for simple and complex indexing operations such as cutting spur and helical gears using the supplied change gears.​

Head can tilt up and down and rotate almost 360° around its base, providing high flexibility in clamping and machining angles.​

Usually supplied with base, tailstock, and dividing plates to cover a wide range of tooth counts and divisions.​

Keywords

Dividing Head Set

milling machine dividing head

Universal Dividing Head UDH80 UDH100 UDH125 UDH160

worm gear 1:40 indexing head

gear and flange dividing device