Steel Bar Bending RB25 Single Phase 220V

Detailed product description

The RB-25 steel rebar bending machine with 220 V single‑phase power is designed for bending work at small sites and rebar workshops, covering rebar diameters from 6 mm up to 25 mm (from #2 to #8 Grade 60).​

It provides a bending angle from 0 to 180 degrees with a bending cycle time of about 6–7 seconds, a bending radius 1.53 times the bar diameter (around 39 mm), and a main bending disc diameter of 94 mm, ensuring uniform bends on bars up to hardness HRC30.​

The machine operates at 1600 W power, 14 A current, with a noise level of about 92 dB, and the housing is made of steel with approximate dimensions 45.5×52×44.5 cm, net weight 91 kg and gross weight 129 kg for good stability and reasonable portability around the jobsite.​

Technical specifications

Voltage: AC220 V / 60 Hz single phase.​

Power: 1600 W.​

Bending angle: 0–180°.​

Max. rebar diameter: 25 mm (about 1 inch, #8 Grade 60).​

Min. rebar diameter: 6 mm (#2 Grade 60).​

Bending speed: 6–7 seconds per cycle.​

Max. rebar hardness: HRC30.​

Bending radius: 1.53×bar diameter (≈39 mm).​

Bending disc diameter: 3.70″ (94 mm).​

Noise level: 92 dB.​

Body material: steel.​

Current draw: 14 A.​

Product dimensions: approx. 45.5×52×44.5 cm.​

Net weight: 91 kg.​

Gross weight: 129 kg.