Automotive Paint Booth

The Yubase-T-Plus (03) Car Spray Booth is designed for body shops, paint workshops, and collision repair centers that require high levels of quality and efficiency in vehicle spraying and drying operations.

The booth uses an advanced air distribution and filtration system, combined with a strong galvanized-steel structure and effective thermal insulation. This creates a clean and safe working environment and helps achieve consistent, professional paint finishes.

It is equipped with a high-performance heating unit featuring an Italian Riello burner and a stainless-steel heat exchanger. Its integrated electronic control system allows precise management of temperature, spraying, and drying operations, helping reduce service time and improve the final finish.

The Yubase-T-Plus (03) is an ideal choice for automotive repair workshops, authorized service centers, dealerships, and vehicle assembly facilities that require reliable operation and high-quality painting results.

Key Features

• Professional industrial design for continuous operation.
• Strong, corrosion-resistant galvanized-steel structure.
• High-efficiency ventilation system with airflow of up to 25,000 m³/hour.
• Integrated spraying and drying system.
• Italian Riello G20 diesel burner.
• SUS304 stainless-steel heat exchanger.
• Multi-stage filtration system for removing dust and fine particles.
• High-brightness LED lighting for clear visibility during painting.
• Electronic control panel with advanced operating and safety functions.
• Customizable equipment and configuration according to customer requirements.

Technical Specifications

• Internal Dimensions: 6900 × 3900 × 2650 mm
• External Dimensions: 7010 × 5350 × 3400 mm
• Main Entrance Door: Three-panel door, 3000 × 2860 mm
• Service Door: 700 × 2000 mm
• Base Height: 300 mm
• Airflow: 25,000 m³/hour
• Total Motor Power: 15 kW
• Heating Power: 200 kW
• Burner Capacity: 200,000 kcal/hour

Booth Structure

The booth is manufactured with a strong steel frame and 50 mm insulated panels that provide effective thermal and sound insulation. The panels use a tongue-and-groove assembly system to ensure secure installation and reduce air leakage.

The structure includes:

• Steel panels coated on both sides.
• High-efficiency EPS insulation.
• 0.6 mm galvanized-steel ceiling.
• Strong internal structure designed for industrial use.

Floor Base

The base is designed to withstand intensive operation in professional paint workshops and includes:

• Fully galvanized steel floor grilles.
• Load capacity of up to 600 kg per wheel.
• Two internal ramps, each measuring 2000 mm in length.
• Support frame made from galvanized-steel tubes.
• G3 fiberglass floor filter compliant with EN779 standards.

Lighting System

The booth is equipped with LED lighting that provides clear and accurate visibility during painting and inspection.

The lighting system includes:

• Ceiling-mounted lighting units.
• Each ceiling unit includes four 22W LED lamps.
• Side-mounted lighting units.
• Each side unit includes two 22W LED lamps.

Ventilation System

The booth uses a balanced airflow system to distribute clean air evenly and remove fumes efficiently.

The ventilation system includes:

• Direct-driven turbo fans.
• 7.5 kW air intake motor.
• 7.5 kW exhaust motor.
• Airflow of up to 25,000 m³/hour.
• Adjustable intake and exhaust airflow control.
• Pneumatic damper for switching between spraying and drying modes.

Heating System

The high-efficiency heating system includes:

• Italian Riello G20 diesel burner.
• Heating capacity of up to 200,000 kcal/hour.
• SUS304 stainless-steel heat exchanger.
• Stainless-steel chimney with rain protection.
• Safety pressure-relief opening to protect against excessive pressure.

Air Filtration System

The multi-stage filtration system provides clean air inside the booth and helps maintain high paint quality.

It includes:

• G3 pre-filter.
• High-efficiency F5 ceiling filter compliant with EN779 standards.
• Fiberglass floor filter.
• Optional activated-carbon filter for air purification and reduced emissions.

Control System

The booth is equipped with an easy-to-use electronic control panel that includes:

• Temperature control.
• Drying timer.
• Air-pressure indicator.
• Spraying and drying mode indicators.
• Lighting control switches.
• Emergency stop button.
• Fault indicators.
• Main operating switches.

Suitable Applications

• Automotive paint workshops
• Body and collision repair centers
• Vehicle dealerships
• Authorized service centers
• Vehicle assembly facilities
• Industrial workshops specializing in painting and coating