The comprehensive cleaning set Verom (1.5 liter) Ulmax (5 liter) and Removefx (5 liter)
530ر.س
Product description
Note: After using the Omax rust remover product, it is recommended to spray a protective material layer using VEROM product to protect surfaces.
What is the comprehensive cleaning set:
1- Omax is an acidic deposit remover, developed for cleaning the lower structures of engines, tires, aluminum chambers, and stainless steel structures. It is a concentrated and economical product to use, removing all surface layers and dirt.
Method of use:
Dilute the product with the recommended concentration. Apply to the entire surface to be cleaned using a spray or foam gun resistant to acidic materials. Leave for 1 to 3 minutes. Then remove the excess with a water stream.
Dilution:
1 liter of the product for every 10 liters of water, and dilution can be adjusted according to the level of dirtiness.
2- Removex is a highly effective degreaser and structure cleaner, developed to remove heavy dirt such as oils, grease, mud, and organic materials from iron structures.
Method of use:
Dilute the product with the recommended concentration. Apply to the entire surface to be cleaned using a spray or foam gun. Leave for 1 to 3 minutes. Then remove the excess with a water stream.
Dilution:
1 liter of the product for every 10 liters of water, and dilution can be adjusted according to the level of dirtiness.
3- VEROM - Water-Based Engine Protector
A water-based product that protects, gives shine, and renews all engine surfaces, such as metal parts, plastics, painted surfaces, and engine hoses. The product forms a thin layer that penetrates difficult areas and adheres to all mentioned surfaces. It is resistant to high temperatures and can also be used on the chassis and wheel wells, providing the same benefits as when used on the engine.
Features:
1- Protection up to 4 months
Method of use:
1. Ensure the surface is clean and dry
2. Use a spray gun or sprayer, then spray the product until the entire part is covered
3. Wait until it dries for about an hour
4. If a non-glossy finish is desired, remove excess with a clean, dry microfiber cloth.
For more of our products: (ALUMAX) Aluminum and exterior structure cleaner (5 liters) and VEROM for protection (1.5 liters)
Questions you might have

