Professional multi-band radio with digital signal processor and single sideband

242

Product description

V4B upgrade contents: 1. A protective cover was added to the Si4732 receiver part to prevent electromagnetic interference; and a static discharge (ESD) protection chip was added at the antenna input terminal to ensure safety. 2. The Hi-Z circuit was moved to the front of the antenna path, and a more stable VCC_RADIO power source was adopted to maintain signal frequency and reduce noise. 3. A function was added to use a wired headset as a modern FM antenna (the headset is not included in the shipping list. Buyers are requested to prepare it themselves; it should be used in an environment with a strong FM signal and the headset cable should be relatively long for better performance). 4. The right and left channels were swapped; at the same time, the speaker and amplifier standards were reset to improve sound quality. 5. The more expensive and better components were replaced: a more durable and stronger telescopic antenna, and a more comfortable and slip-resistant handle cover. 6. The motherboard directly supports the H.J.Berndt fixed firmware. No additional soldering or motherboard modification is needed, and the official firmware will be pre-installed by default. After receiving the device, you will need to manually update to the H.J.Berndt firmware version. The firmware developed by H.J.Berndt includes functions such as RTTY/CW decoding. 7. Since 2026, the radios of this model have been upgraded to version V4B. This version can support the fixed H.J.Berndt firmware directly without additional soldering or motherboard modification. However, it should be noted that the radio will have the official firmware installed by default instead of the H.J.Berndt firmware. After receiving the device, you will need to manually update the firmware to the H.J.Berndt version. The firmware developed by H.J.Berndt includes functions such as RTTY/CW decoding. Basic functions: 1. Uses ESP32-S3 as the main control unit and SI4732 DSP chip. Supports transmission across all bands, LSB USB AM FM modes, and includes AGC/ATT functions. 2. Equipped with a high-resolution 1.9-inch color IPS screen, allowing adjustment of backlight brightness and display of battery level. 3. Equipped with a 1-watt speaker with clear and pleasant sound quality. 4. Supports firmware upgrade to the latest version. The pre-installed factory firmware version is at least 2.3.1 (due to frequent firmware updates, please update to the latest version immediately upon receipt according to instructions to maintain the best user experience). 5. Includes an earphone amplifier circuit, ensuring a high volume level when listening with headphones. 6. Equipped with a Hi-Z circuit to enhance the accuracy of weak signals. 7. Continues to use the original ESP32 unit (ESP32-S3-WROOM-1-N16R8) instead of counterfeit units used by other clone models. Regarding hardware version: 1. The main boards of all current AMNVOLT V4 versions of ATS MINI radios available on the market are actually V4B. 2. We have not changed the "V4" printed on the casing and main board, but in fact, all main boards have been upgraded to version V4B. Please be assured when purchasing and using. 3. How to identify if the radio you received is V4B version: ignore the printed words and directly check the reference diagram. If the corresponding position matches this diagram, it is V4B. Specifications: Brand: AMNVOLT Model (hardware version): V4B Case material: your choice of metal or ABS injection molding. Main controller: ESP-32-S3 Operating modes: FM / AM / LSB / USB (note: airband not supported) Reception bands: HF / SW / MW / VHF Frequency ranges: LW, MW, SW (150 kHz - 30 MHz), VHF (64-108 MHz) Screen: 1.9 inches, resolution 170*320 Screen brightness: 32~255 levels, adjustable Charging port: TYPE-C (fast chargers cannot be used for charging) Audio jack: 3.5 mm stereo with three poles Antenna connector: SMA-KE (female, internal thread) Battery capacity: 800 mAh Package list: 1 × AMNVOLT V4B radio 2 × antennas (telescopic whip antenna / rotatable loop antenna) Please note when purchasing: 1. Headphones are not included in the package. The headphones shown in the pictures are only used to illustrate the FM antenna function. Please prepare your own headphones! 2. If you choose the version with a metal case, please note that aluminum material provides some protection against wireless electromagnetic signals. While it improves reception against interference, it may also strengthen Wi-Fi connection. Please consider this before purchasing.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌