AZOUF 1000 L Trailer Spray Pump – HONDA GX270 9 HP, 60 Bar Pump, 2 × 100 m Hoses

• A trailer-mounted agricultural spray pump from AZOUF with a Turkish-made, three-layer insulated fiberglass tank of 1000 liters, designed to withstand tough operating conditions in agricultural projects and field pest control. It runs on a genuine Japanese HONDA GX270 9 HP engine for steady performance and high endurance during long operation. It is equipped with a Taiwanese pressure pump of up to 60 bar, giving strong pumping power for long-distance spraying, soil injection and pest control. The two-wheel trailer chassis makes it easy to move around farms and project sites, with a top canopy protecting the engine and pumping system.

Key Features

• Three-layer insulated fiberglass tank for temperature stability and extra durability
• Turkish-made for heavy-duty agricultural use
• Genuine Japanese HONDA GX270 9 HP engine
• Taiwanese pump with pressure up to 60 bar for spraying and injection work
• Two Korean hoses, 100 m each, to cover large areas without moving the unit
• Side liquid level gauge to monitor the solution during operation
• Strong steel trailer chassis suitable for rough farmland

Specifications

• Brand: AZOUF
• Equipment Type: Trailer-mounted agricultural spray pump
• Tank Capacity: 1000 L
• Tank Type: Three-layer insulated fiberglass
• Tank Country of Manufacture: Turkey
• Engine: HONDA GX270 (Japanese)
• Engine Power: 9 HP
• Fuel: Gasoline
• Engine Oil: SAE 10W-30
• Operating Pressure: Up to 60 bar
• Pump Type: Taiwanese pressure pump
• Number of Hoses: 2
• Hose Length: 100 m each
• Mobility: Two-wheel trailer
• Protective Canopy: Included

Uses

• Pre-construction and during-construction termite control projects
• Red palm weevil control in farms and orchards
• Spraying pesticides and liquid fertilizers on large farms
• Outdoor work for pest control companies
• Spraying tall trees and wide areas

Directions for Use

• 1- Make sure the engine is filled with SAE 10W-30 oil and check the level before starting.
• 2- Fill the tank with water first, then add the pesticide or fertilizer at the recommended dose.
• 3- Fill the fuel tank with gasoline of at least 91 octane.
• 4- Start the engine and set the engine speed to the required application pressure.
• 5- Adjust the pressure regulator to the type of use (spraying – soil injection – trunk treatment).
• 6- When finished, run clean water through the system to flush the tank, pump and hoses.

Important Tip

• For termite control and soil injection work, run the unit at a stable pressure and use maximum pressure only when needed, to extend the life of the pistons and valves. Clean the filters and hoses regularly, especially when using highly concentrated pesticides.

Safety Warnings

• Never run the pump without water in the system.
• Wear personal protective equipment while spraying.
• Make sure the trailer is firmly secured before operation.
• Do not direct the spray at people or animals.
• Keep the unit away from children.