Ubi laser device with cooling feature 600 thousand flashes

Laser hair removal device with cooling feature from UBI Laser home from UBI easy to use say goodbye to clinics and expensive costs when using it press the power button for 5 seconds you can also increase the flash strength by pressing the power button for 5 levels you can turn on the cooling feature and you will not feel any pain by pressing the M key until the cooling sign appears on the device activate automatic flash mode turn on the device then press the button under the lens for two seconds until it appears on the screen it is activated the device works as a home laser with batteries allowing you to take it with you wherever you are you can charge the device or use it directly via power source the device has one fixed lens for the body and for bikini areas you can set the device to automatic flash mode the golden warranty 5 years enjoy smooth and radiant skin free of annoying hair on the body and all areas with the home laser from UBI a beauty product characterized by hair removal with cold ice technology combined with pulsed light technology the device integrates many optical technologies applied in the field of beauty and health and is one of the practical products in this field when enabling the cooling hair removal mode it can reduce the excess heat caused by light pulses on the skin and perform cold presses during hair removal thus providing proper care for your skin the hair removal device is a non-prescription tool for removing excess hair for men and women adults 1- suitable skin color prohibited to use the device on dark brown skin do not use the home laser in areas with tattoos or dark gray or black spots otherwise the skin may be uncomfortable due to high absorption of light energy prohibited to use the device on ears neck nipples and genital organs as these areas are sensitive and prone to injury do not use the device while using any creams in the same area stop using the product if the skin turns red or swollen and if the condition persists for at least 24 hours in this case contact your doctor it is recommended to try the device for the first time on a specific area preferably on the hands and wait for a minute or two and ensure there is no skin irritation or redness or the body does not accept the strength of the device if redness occurs or the body does not tolerate the device's power reduce the device's strength and repeat the test 2- safety operation specifications it is prohibited to direct the hair removal device at risk areas such as the eyes and wear protective glasses whenever possible try not to look at the reflected light from the laser light outlet even if you are wearing protective glasses. ensure all metal materials, such as rings and bracelets, are removed from your body before using the product otherwise, this may cause the device to malfunction always keep out of reach of children during use and the product should be stored properly in places inaccessible to children 4- precautions after using the device in cooling mode it cannot be switched directly to non-cooling mode wait a few minutes to prevent skin burns if you want to switch to non-ice-cool mode (non-cooling mode) you must turn off the device and wait 20 minutes to dissipate the heat then turn the device back on to set it to non-ice-cool mode. description of switching work modes return to "operation steps" below to turn on the device. 2. switching between hair removal and skin rejuvenation modes: press the "mode switch button": SR indicates skin rejuvenation mode, otherwise it is hair removal mode the device's pulse count is 600,000 which is enough for more than 8 years when the battery power decreases, the flash will only when the device is in manual light emission mode (default mode after startup). in the following two modes of operation, you can perform cold pressure care without pressing the flash button. position the laser device vertically and close to your skin and start using tips in cold pressing care it is necessary to press the "level adjustment button" once every 5 minutes to keep the hair removal device running otherwise, it will turn off automatically in this case, just press and hold the "power button" for 5 seconds to restart it and similarly to turn it off