Nasal washing set Rossmax ROSS MAX NW1

Product description: NW1 nasal spray device is a device for nasal irrigation that helps treat and eliminate harmful substances, residues, and mucus materials for the nasal cavity and pharynx, using saline solutions or medicinal solutions for those who need hyperbaric treatment, where the device can be used by adults or children and is considered for home use in addition to hospital use. Usage instructions: The NW1 nasal spray device connects to a nebulizer device, such as Rossmax, which treats the aqueous solution to rinse the nasal cavity by pressing the button on the arm to activate the nebulizer and collect the returned fluids. It can be used with saline solutions, warm water, or medicinal solutions for hyperbaric treatment. The nasal spray device consists of two parts: an internal chamber to hold the solution for vaporization, and an external chamber to collect the returned liquid. The converter is inserted into the top of the nasal spray device with a silicone head that comes in three sizes, where the size suitable for the user's nostril opening is chosen. Tap water is not recommended. The device contains small parts that are easy for children to swallow, which can lead to choking, so it is advised to keep the device out of their reach. The device must be used under adult supervision who has read the instructions thoroughly. The device should not be used with compressed air devices during bathing. Do not add more than 20 ml of saline solution into the liquid chamber. Clean and disinfect the device after each use to prevent disease transmission and maintain device effectiveness. Make sure the nebulizer's power button is in the OFF position and that the power source is disconnected before cleaning and assembly, both before and after each use. Do not insert any objects into the connecting tube of the nasal spray device. Do not use a solid object to clean or disconnect the device to prevent damage. No maintenance should be performed on the device during use. Do not store the unit in direct sunlight, high temperatures, or humidity. Warnings and precautions: Wash hands and clean the device as mentioned in the disinfection and sterilization paragraph before each use. Carefully prevent droplets from falling from the nose during use. Choose a nasal converter with a silicone tip and a suitable size (L, M, S) that fits the nostril opening, and insert it into the upper cover. Insert the nozzle into the central part and ensure the nozzle is properly adjusted each time you use it. Place the separator and replace the upper cover. Connect one end of the air tube to the nebulizer's air outlet and the other end to the inhaler unit connector. Ensure all parts are correctly connected, then connect the nebulizer to the power outlet and turn on the device by switching it to the ON position. It is recommended to keep the nasal spray device upright or at a 30-degree angle during use for nasal rinsing. If the angle exceeds 30 degrees, the returned liquid may exit from the collection chamber. Place the device close to the nose and gently insert the nasal converter into one nostril. During the procedure, it is advised to press the second opening with a finger and keep the second opening closed. Start nasal rinsing by continuously pressing the trigger during inhalation, then release the trigger during exhalation. To clear mucus, gently blow through the nostril directly while using the nasal spray device. Repeat the previous method with the second nostril and try to distribute the solution evenly between both nostrils. Prevent spray from entering your nose when needed. When using the device for cleaning or medical purposes, it is advised to rinse the nose with saline solution before starting aerosol treatment. This helps distribute the medication more effectively across the nasal mucosa. After finishing, turn off the nebulizer and start the cleaning process as described in the "disinfection and sterilization" paragraph. It is recommended to clean or sterilize the device before use. Ensure the nebulizer's power button is in the OFF position and that the power source is disconnected before cleaning. Disassemble the device parts as follows: 1. Disconnect the air tube (8) from both the nebulizer and the nasal spray device after each use. 2. Disconnect: the external converter (1), the upper cover (2), the separator (3), and the nozzle (4) from the device. 3. Dispose of the collected and accumulated liquid in the collection chamber after each use. Sterilization involves sterilizing and washing each part with clean, warm water (approximately 40°C) and a non-abrasive dish soap. Allow parts to air dry in a clean environment. Prepare a new solution for each cleaning cycle and dispose of the solution after each use to prevent the risk of infection from germs during sterilization. Components: 1. Nebulizer device with three rubber heads (S / M / L) to suit all ages. 3. Upper cover with a chamber for liquid removal.