Luxury electric medical bed with four movements without mattress - Riyadh and Jeddah only

Luxury very low electric medical care bed with four movements - FOUR FUNCTION SUPER LOW ELECTRIC MEDICAL CARE BED available in Riyadh, Jeddah, and Abha only - without mattress model number DH6A431C-1 bed frame: electrically driven medical care bed with three motors to lift the back panel, leg panel, and the entire bed. The bed consists of a bed frame, front panel, back panel, seat panel, leg panel, foot panel, rear railing, foot safety barrier, wheels, wheel frames, manual mechanism. The bed panel is made of polypropylene by injection or blow molding, with locking function, easy disassembly, high strength, and can also be used as a CPR panel. Performance structure: 1 - The bed includes three types of motors, with bed height adjustable from 0 to 260 mm. 2 - The bed body is welded from high-strength carbon steel, coated with electrostatic phosphoric powder spray and heat-treated at high temperature, characterized by good rust resistance. 3 - Around the bed frame, four injection sockets to meet different injection needs. 4 - Each side of the bed has four hooks for hidden drainage bags. 5 - The headboard is made of imported ABS-PP by injection molding, high strength, acid and alkali resistant. 6 - The railing height is 220 - 300 mm, can be completely hidden if not needed, and does not take external space. Uses: The bed is used in hospital wards to carry and nurse patients. The bed is suitable for patients in hospitals or homes (luxury type). The bed is suitable for patients with a height not exceeding 192 cm and weight not exceeding 210 kg. Be careful when using the bed, children are prohibited from operating the bed. During use, ensure that the power line and control line do not fall to the ground to prevent wheels from crushing the insulation layer. Be careful not to drop the control unit on the ground and damage it. Before moving the bed, ensure to release the wheel brakes. Under normal use, the product must undergo structure and safety inspection procedures every six months. The bed does not produce waste, but damaged replaced parts may cause injury and should be removed from the ward area and sent to a waste recycling station for disposal. Clean and disinfect the bed with disinfectant in cases of: A / patient change. B / severe contamination and after each period of use (3 months). The product is prohibited from being cleaned with corrosive acidic or alkaline chemicals or radioactive materials. It is forbidden to operate the device when the patient is standing at the head or tail of the bed. When moving the bed for use, first ensure that nothing is stored inside the bed. Do not handle or disassemble the bed arbitrarily without authorization. Ensure that the bed is properly grounded, and operating it in switch rooms, oxygen tents, or other places filled with anesthetic or oxygen gases is prohibited, but general oxygen therapy is not very restricted. Electrical safety is very important for electric care beds. When disconnecting power or repairing, to avoid electric shock risk, the bed is equipped with a dedicated power line and plug; the plug must be properly inserted into the fixed socket, in accordance with local customs and rules. Dimensions: Length: 213 cm, Height: 99 cm, Width: approximately 93 cm, Bed height from ground: between 49.5 – 63 cm.