eSUN PLA Basic Gold 3D Printing Filament 1.75mm 1kg

eSUN PLA Basic Gold is a modified PLA filament for FDM 3D printing, supplied in 1.75mm diameter with a 1kg net weight. It combines easy printing, good toughness, high forming accuracy, smooth surface quality and neat layer lines while supporting print speeds up to 300 mm/s, in a warm golden-yellow tone with a subtle orange influence.

⭐ eSUN PLA Basic is a cost-effective and well-balanced PLA option combining easy printing, good toughness, high forming accuracy, smooth surfaces and neat layer lines with high-speed printing support for training, everyday printing and prototypes.

📦 Product Information

🔹 Brand: eSUN

🔹 Product: eSUN PLA Basic

🔹 Material: PLA Basic

🔹 Official Color: Gold

🔹 Filament Diameter: 1.75mm

🔹 Net Weight: 1kg

⭐ Why Choose eSUN PLA Basic Gold?

🔹 Cost-effective choice for beginners, training, everyday printing and prototyping.

🔹 Modified PLA formulation designed for easy printing and smooth, stable extrusion.

🔹 Low shrinkage helps reduce warping and stringing for reliable prints.

🔹 Good toughness and high forming accuracy with good resistance to breakage.

🔹 Smooth surface and neat layer lines for clean details and appearance.

🔹 Supports high-speed printing up to 300 mm/s.

🔹 Gold provides a warm golden-yellow appearance with a subtle orange influence; it should not be confused with a glossy metallic Silk filament.

🖨️ Printer Compatibility

Compatible with FDM printers that support 1.75mm filament, including printers from:

🔹 Bambu Lab

🔹 Creality

🔹 Prusa Research

🔹 Anycubic

🔹 ELEGOO

🔹 Suitable for open and enclosed printers that support PLA and 1.75mm filament.

⚙️ Printing Settings

🔹 Nozzle Temperature: 210–230°C

🔹 Build Surface Temperature: 45–60°C

🔹 Fan Speed: 100%

🔹 Printing Speed: up to 300 mm/s

💡 Recommendations and Conditions of Use

🔹 Drying: 50°C for 8–12 hours.

🔹 Keep the filament dry and protected from moisture after opening to help maintain consistent print quality.

🔗 Filament Storage Bags and Moisture Control Silica

📊 Technical Specifications

🔹 Density: 1.24 g/cm³

🔹 Melt Flow Index MFI: 6.48 g/10min at 190°C and 2.16kg

🔹 Heat Distortion Temperature HDT: 53.65°C at 0.45 MPa

🔹 Tensile Strength XY: 64.27 MPa

🔹 Tensile Strength Z: 32.34 MPa

🔹 Elongation at Break XY: 4.61%

🔹 Elongation at Break Z: 2.89%

🔹 Flexural Strength XY: 106.8 MPa

🔹 Flexural Strength Z: 53.2 MPa

🔹 Flexural Modulus XY: 3775.06 MPa

🔹 Flexural Modulus Z: 3285.49 MPa

🔹 IZOD Impact Strength XY: 3.25 kJ/m²

🔹 IZOD Impact Strength Z: 2.31 kJ/m²

🧩 Applications

🔹 Prototyping

🔹 Cosplay

🔹 Decoration

🔹 Other Mechanical Parts

🍽️ Food Contact and Safety

🔹 eSUN lists EN 71-3, FDA, REACH, RoHS and food-contact documentation for the PLA Basic series.

🔹 Current EN 71-3 and food-contact reports use Orange PLA Basic samples, so no separate Gold-specific certification is claimed.

For technical datasheets, printing settings and CubicSky support guides, see:

🔗 3D Printing Materials Settings and Technical Support Guide

📚 Official Sources and Documents

🔗 Official eSUN PLA Basic Product Page

🔗 eSUN PLA Basic Technical Data Sheet

🔗 PLA Basic EN 71-3 Test Report

🔗 PLA Basic Food Contact Test Report