Bambu Lab PLA Sparkle Filament with Spool 1.75mm 1kg (6 Colors)

Bambu Lab PLA Sparkle gives 3D printed parts a distinctive sparkling appearance through metal particles incorporated into the PLA formulation. It combines an aesthetic finish with familiar PLA printability and comes supplied on a reusable Bambu Lab Basic Spool. This product is available in six sparkling colors with a 1.75mm filament diameter and 1kg net weight.

📦 Product Information

🔹 Brand: Bambu Lab

🔹 Series: PLA Sparkle

🔹 Material: PLA

🔹 Finish: Sparkling effect with metal particles

🔹 Diameter: 1.75 ± 0.03mm

🔹 Net Weight: 1kg

🔹 Type: Filament with reusable Basic Spool

🔹 Available Colors: 6

🔹 AMS and AMS lite compatible

⭐ Why Choose Bambu Lab PLA Sparkle?

🔹 Distinctive sparkling appearance for visually focused 3D prints.

🔹 Metal particles within the filament formulation create the sparkle effect.

🔹 Relatively high impact strength according to Bambu Lab.

🔹 Supplied with a reusable Bambu Lab Basic Spool.

🔹 RFID enables supported Bambu Lab AMS systems to identify filament printing parameters.

🔹 Well suited to display models, decorative parts, creative prints, and projects where appearance is a priority.

🖨️ Printer Compatibility

Compatible with FDM 3D printers that support 1.75mm filament and suitable PLA Sparkle printing settings, including printers from Bambu Lab, Creality, Prusa Research, Anycubic, and ELEGOO.

A 0.2mm nozzle is not compatible with PLA Sparkle due to the increased risk of clogging.

🖨️ Applications

🔹 Figures and artistic models.

🔹 Decorative parts and ornaments.

🔹 Display models and printed gifts.

🔹 Creative projects that benefit from a sparkling surface finish.

⚙️ Technical Specifications

🔹 Nozzle Temperature: 190–230°C

🔹 Bed Temperature with Glue: 35–45°C

🔹 Printing Speed: <250mm/s

🔹 Density: 1.26g/cm³

🔹 Vicat Softening Temperature: 57°C

🔹 Heat Deflection Temperature: 55°C

🔹 Melting Temperature: 156°C

🔹 Tensile Strength: 33 ± 3MPa

🔹 Elongation at Break: 11.7 ± 0.7%

🔹 Bending Strength: 63 ± 4MPa

🔹 Bending Modulus: 2310 ± 140MPa

🔹 Impact Strength: 66.5 ± 3.6kJ/m²

💡 Recommendations

🔹 Keep the filament sealed with desiccant. Bambu Lab recommends maintaining less than 20% RH during printing and storage.

🔹 If the filament absorbs moisture, Bambu Lab recommends drying at 55°C for 8 hours in a blast drying oven.

🔹 Do not use a 0.2mm nozzle with PLA Sparkle to reduce the risk of clogging.

🔹 Optimal settings can vary depending on the printer, build surface, and model geometry, so use the recommended values as a starting point.