eSUN PLA+ Holly Green 3D Printing Filament 1.75mm 1kg
79.99ر.س
Product description
eSUN PLA+ Holly Green is an enhanced PLA filament for FDM 3D printing, supplied in 1.75mm diameter and 1kg net weight. It combines improved strength and toughness with easy printing, a smooth surface and high-speed printing capability.
⭐ Improved strength and toughness with easy printing at speeds up to 300 mm/s.
Compatible with FDM printers that support PLA, 1.75mm filament and nozzle temperatures up to 230°C, including:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS Lite, AMS 2 Pro and AMS HT support PLA, subject to suitable spool dimensions and third-party filament settings.
🔹 Creality: CFS supports PLA, while CFS Lite supports PLA and suitable eSUN third-party spools.
🔹 Anycubic: ACE Pro and ACE 2 Pro support PLA, subject to the material capabilities of the paired printer.
🔹 Prusa: MMU3 supports PLA.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA+
🔹 Material: PLA
🔹 Color: Holly Green
🔹 Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA+?
🔹 Improved strength and toughness compared with ordinary PLA, with better resistance to breakage.
🔹 Easy to print with a smooth surface and neat layer lines.
🔹 Supports high-speed printing at speeds up to 300 mm/s.
🔹 Holly Green is a deep, saturated green with a subtle blue cast, close to a dark petrol-green tone, with a smooth surface.
⚙️ Printing Settings
🔹 Nozzle Temperature: 210–230°C.
🔹 Bed Temperature: 45–60°C.
🔹 Fan: 100%.
🔹 Print Speed: Up to 300 mm/s.
💡 Recommendations and Conditions of Use
🔹 Drying: 50°C for 8–12 hours.
🔹 For improved print results, eSUN recommends aligning the Z seam and starting point, optimizing the slicing path and reducing print speed when necessary.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.24 g/cm³.
🔹 Melt Flow Index: 3.7 g/10min at 190°C / 2.16kg.
🔹 Heat Distortion Temperature: 53.78°C at 0.45 MPa.
🔹 Tensile Strength XY: 70.37 MPa.
🔹 Tensile Strength Z: 36.36 MPa.
🔹 Elongation at Break XY: 4.14%.
🔹 Elongation at Break Z: 2.92%.
🔹 Flexural Strength XY: 100.3 MPa.
🔹 Flexural Strength Z: 56.4 MPa.
🔹 Flexural Modulus XY: 3259.39 MPa.
🔹 Flexural Modulus Z: 2873.94 MPa.
🔹 IZOD Impact Strength XY: 7.27 kJ/m².
🔹 IZOD Impact Strength Z: 2.22 kJ/m².
🧩 Applications
🔹 Prototyping, cosplay, decoration and mechanical parts.
🍽️ Food Contact and Safety
🔹 SGS FDA, EU Food Contact and EN 71-3 reports are available for PLA+; the food-contact test samples are described as white PLA, so their results are not attributed specifically to the Holly Green color.
🔹 An official SDS is available, while SGS REACH and RoHS reports include PLA+ within their sample scope.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA+ Product Page
🔗 PLA+ TDS
🔗 PLA+ SDS





