eSUN PLA-Matte Milky White 3D Printing Filament 1.75mm 5kg
391ر.س
Product description
eSUN PLA-Matte Milky White is a matte PLA filament for FDM 3D printing, supplied in 1.75mm diameter and a large 5kg spool. It provides a fine, uniform low-gloss surface with easy printing and low shrinkage.
⭐ Large 5kg spool with a smooth matte finish and print speeds up to 200 mm/s.
Compatible with FDM printers that support PLA-Matte, 1.75mm filament and nozzle temperatures up to 230°C, including:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS systems support PLA Matte, subject to supported spool dimensions and third-party filament settings; compatibility of the 5kg spool itself depends on the system's spool-size limits.
🔹 Creality: CFS and CFS Lite support PLA, but their official spool specifications are intended for standard 1kg spools.
🔹 Anycubic: ACE 2 Pro supports PLA within its specified spool dimensions; the physical size of the 5kg spool must be considered.
🔹 Prusa: MMU3 supports PLA; an appropriate spool holder must be considered for a large 5kg spool.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Matte
🔹 Material: PLA
🔹 Color: Milky White
🔹 Diameter: 1.75mm.
🔹 Net Weight: 5kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Matte?
🔹 A fine and uniform matte surface reduces reflections and provides a clean visual finish.
🔹 Optimized support adhesion allows easier removal with a smoother contact surface.
🔹 Easy printing, low shrinkage and stable extrusion support large and long-duration prints.
🔹 The 5kg capacity reduces spool changes during long printing projects.
🔹 Milky White appears as a soft warm milky white with a smooth matte appearance.
⚙️ Printing Settings
🔹 Nozzle Temperature: 190–230°C.
🔹 Bed Temperature: 45–60°C.
🔹 Fan: 100%.
🔹 Print Speed: Up to 200 mm/s.
💡 Recommendations and Conditions of Use
🔹 Drying: 50°C for more than 8 hours.
🔹 PLA-Matte is softer than some other filaments; avoid excessive extruder gear tension.
🔹 eSUN recommends keeping the printer enclosure open while printing PLA, particularly in high ambient temperatures.
🔹 Store the filament in a dry, tightly closed environment after use, especially with a large spool to limit moisture exposure of the remaining material.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.329 g/cm³.
🔹 Melt Flow Index: 5.8 g/10min at 190°C / 2.16kg.
🔹 Heat Distortion Temperature: 51°C at 0.45 MPa.
🔹 Tensile Strength XY: 25.976 MPa.
🔹 Tensile Strength Z: 14.31 MPa.
🔹 Elongation at Break XY: 7.23%.
🔹 Elongation at Break Z: 2.26%.
🔹 Flexural Strength XY: 42.6 MPa.
🔹 Flexural Strength Z: 21.1 MPa.
🔹 Flexural Modulus XY: 2249.05 MPa.
🔹 Flexural Modulus Z: 1782.62 MPa.
🔹 IZOD Impact Strength XY: 4.7 kJ/m².
🔹 IZOD Impact Strength Z: 2.15 kJ/m².
🧩 Applications
🔹 Decoration, cosplay, models, prototypes and long-duration prints that benefit from a matte surface and large filament capacity.
🛡️ Safety and Documents
🔹 An official SDS is available for PLA-Matte, and the series is included within the sample scope of SGS REACH and RoHS reports.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA-Matte Product Page
🔗 Bambu Lab PLA Matte Compatibility
🔗 Creality CFS Lite Compatibility
🔗 Anycubic ACE 2 Pro Compatibility
🎥 Video
