eSUN PLA-Silk Lime 3D Printing Filament 1.75mm 1kg
89ر.س
Product description
eSUN PLA-Silk Lime is a glossy PLA 3D printing filament for FDM printers, supplied in a 1.75mm diameter and 1kg net-weight spool. Its vibrant lime green color and smooth silk-like reflections give decorative models an attractive finish while reducing the visibility of layer lines.
⭐ eSUN PLA-Silk combines a silky gloss, attractive appearance, easy printing, and a smooth surface finish, with easy support removal and a refined printed appearance.
Compatible with FDM printers supporting PLA, 1.75mm filament, and nozzle temperatures up to 230°C, including suitable printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS Lite, AMS 2 Pro, and AMS HT support suitable PLA materials subject to each system's restrictions, spool dimensions, and third-party filament settings.
🔹 Creality: CFS and CFS Lite support PLA, subject to spool-size and printer compatibility.
🔹 Anycubic: Anycubic does not recommend third-party PLA Silk filament, including brands such as eSUN, inside ACE Pro or ACE 2 Pro.
🔹 Prusa: MMU3 supports PLA, subject to appropriate printer settings and filament feeding conditions.
📦 Product Information
🔹 Brand: eSUN.
🔹 Product: PLA-Silk.
🔹 Material: PLA.
🔹 Color: Lime.
🔹 Color Groups: Green.
🔹 Filament Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Silk Lime?
🔹 Smooth silky gloss creates gentle light reflections across printed surfaces.
🔹 Refined surface finish helps reduce the visibility of layer lines.
🔹 Prints easily like PLA, with supports that can be removed while maintaining a smooth contact surface.
🔹 The Lime color offers a bright lime green appearance suitable for decorative and artistic designs.
🔹 Well suited to prints where color and surface appearance are important design elements.
⚙️ Recommended Printing Settings
🔹 Nozzle Temperature: 190–230°C.
🔹 Bed Temperature: 45–60°C.
🔹 Cooling Fan: 100%.
🔹 Printing Speed: Below 200 mm/s.
🔹 Nozzle Sizes Listed in TDS: 0.2, 0.4, 0.6, and 0.8mm.
🔹 Build Surface Listed in TDS: PEI.
🔹 Adjust print settings to suit the printer, model geometry, and desired surface appearance.
💡 Printing and Storage Recommendations
🔹 Reduce outer-wall printing speed to enhance the silk-gloss appearance.
🔹 The TDS lists drying preparation at 50°C for more than 8 hours when material preparation is required.
🔹 Store the spool in a sealed container away from moisture and direct heat.
🔹 Optimize seam alignment and travel paths to minimize visible surface marks.
🔹 Explore CubicSky filament storage and drying accessories.
📊 Technical Specifications
🔹 Density: 1.21 g/cm³.
🔹 Melt Flow Index (MFI): 4.8 g/10min at 190°C / 2.16kg.
🔹 Heat Deflection Temperature (HDT): 50°C at 0.45 MPa.
🔹 Tensile Strength XY: 32.53 MPa.
🔹 Tensile Strength Z: 17.36 MPa.
🔹 Elongation at Break XY: 11.65%.
🔹 Elongation at Break Z: 1.84%.
🔹 Flexural Strength XY: 44.4 MPa.
🔹 Flexural Strength Z: 23.1 MPa.
🔹 Flexural Modulus XY: 1917.35 MPa.
🔹 Flexural Modulus Z: 1858.86 MPa.
🔹 IZOD Impact Strength XY: 2.93 kJ/m².
🔹 IZOD Impact Strength Z: 2.19 kJ/m².
🧩 Applications
🔹 Artistic and decorative 3D printed models.
🔹 Toys and display models.
🔹 Custom gifts and decorative accessories.
🔹 Projects requiring a glossy silk-like surface finish.
🛡️ Safety and Technical Documents
🔹 A PLA-Silk Safety Data Sheet (SDS) is available with handling, storage, and safety information.
🔹 REACH screening documentation includes PLA-Silk in a mixed group of tested material samples within the report's stated scope.
🔹 Print in a well-ventilated area and avoid touching hot nozzles and build surfaces.
📘 For datasheets, print settings, and support resources at CubicSky, see: 🔗 3D Printing Materials, Settings, and Technical Support Guide.
📚 Sources
🔗 Official eSUN PLA-Silk Product Page
🔗 Official Technical Data Sheet (TDS)
🎥 Video
