eSUN PLA-Silk White 3D Printing Filament 1.75mm 1kg
89ر.س
Product description
eSUN PLA-Silk White is a glossy filament for FDM 3D printing, supplied in 1.75mm diameter with a net weight of 1kg. Its pearlescent white appearance, smooth silk-like surface and reflective finish make it suitable for decorative models, artistic prints, gifts and display objects.
⭐ eSUN PLA-Silk combines easy PLA printability with a smooth, silky gloss and reduced layer-line visibility, producing elegant decorative models with attractive surface details.
Compatible with FDM printers supporting PLA-Silk, 1.75mm filament and nozzle temperatures up to 230°C, including printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS 2 Pro and AMS HT support PLA-Silk; the eSUN spool physically fits AMS Lite.
🔹 Creality: CFS and CFS Lite support PLA-Silk, subject to spool compatibility.
🔹 Anycubic: Third-party PLA-Silk such as eSUN is not recommended inside ACE Pro or ACE 2 Pro.
🔹 Prusa: MMU3 supports PLA under the applicable feeding requirements.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Silk
🔹 Material: PLA
🔹 Color: White.
🔹 Filament Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Silk?
🔹 Smooth silk-like gloss with attractive light reflections.
🔹 Refined surface finish with less visible layer lines.
🔹 Easy printing characteristics from its modified PLA formulation.
🔹 Easier support removal with smooth contact surfaces.
🔹 Suitable for decorative objects, sculptures and display models.
🔹 White features a warm pearlescent white tone with subtle ivory undertones and soft silky reflections, especially on curved surfaces.
⚙️ Printing Settings
🌡️ Nozzle Temperature: 190–230°C.
🛏️ Bed Temperature: 45–60°C.
💨 Cooling Fan Speed: 100%.
🏃 Printing Speed: Up to 200 mm/s.
💡 Recommendations and Usage Conditions
🔹 Reduce outer-wall printing speed to enhance the silky gloss and surface finish.
🔹 Maintain effective cooling when printing overhangs and fine details.
🔹 Align Z-seam positions and optimize nozzle travel paths to reduce visible surface marks.
🔹 Keep the printer enclosure open in warm conditions to prevent excessive PLA softening inside the feeding system.
🔹 Dry at 50°C for more than 8 hours when needed.
🔹 Store the filament in cool, dry conditions inside tightly sealed packaging.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.21 g/cm³.
🔹 Melt Flow Index (MFI): 4.8 g/10min at 190°C / 2.16kg.
🔹 Heat Deflection Temperature (HDT): 50°C at 0.45 MPa.
🔹 Tensile Strength XY: 32.53 MPa.
🔹 Tensile Strength Z: 17.36 MPa.
🔹 Elongation at Break XY: 11.65%.
🔹 Elongation at Break Z: 1.84%.
🔹 Flexural Strength XY: 44.4 MPa.
🔹 Flexural Strength Z: 23.1 MPa.
🔹 Flexural Modulus XY: 1917.35 MPa.
🔹 Flexural Modulus Z: 1858.86 MPa.
🔹 IZOD Impact Strength XY: 2.93 kJ/m².
🔹 IZOD Impact Strength Z: 2.19 kJ/m².
🧩 Applications
🔹 Artistic models and decorative sculptures.
🔹 Home decor, gifts and accessories.
🔹 Cosplay props and display objects.
🔹 Models requiring a glossy pearlescent white finish.
🛡️ Safety and Documentation
🔹 An official SDS is available for PLA-Silk, and the series is included within the tested sample scope of REACH and RoHS reports.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔹 Official eSUN PLA-Silk Product Page
🔹 PLA-Silk Technical Data Sheet
🔹 Creality CFS Lite Compatibility
🔹 Anycubic ACE Pro Compatibility
🎥 Video
