eSUN ePLA-Matte Aqua 3D Printing Filament 1.75mm 1kg
79.99ر.س
Product description
eSUN ePLA-Matte Aqua is a matte PLA filament for FDM 3D printing, supplied in 1.75mm diameter with a 1kg net weight. It combines easy printing, a fine uniform matte surface, reduced visual layer lines, easy support removal and stable extrusion while supporting print speeds under 200 mm/s, in a soft light aqua-blue tone with a subtle cyan-turquoise influence.
⭐ eSUN ePLA-Matte is a cost-effective matte PLA option combining easy printing, a smooth uniform matte finish, easy support removal and consistent printing stability for clean professional-looking models.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: eSUN ePLA-Matte
🔹 Material: Matte PLA
🔹 Official Color: Aqua
🔹 Filament Diameter: 1.75mm
🔹 Net Weight: 1kg
⭐ Why Choose eSUN ePLA-Matte Aqua?
🔹 Fine and uniform matte surface with reduced glare for a clean professional appearance.
🔹 Matte finish helps visually reduce the appearance of layer lines and minor surface imperfections.
🔹 Optimized support adhesion allows easier removal with less surface damage.
🔹 Stable extrusion and layer adhesion during prolonged printing and larger models.
🔹 Low shrinkage with good resistance to warping and cracking during printing.
🔹 Supports print speeds under 200 mm/s.
🔹 Aqua provides a soft light aqua-blue appearance with a subtle cyan-turquoise influence.
🖨️ Printer Compatibility
Compatible with FDM printers that support 1.75mm PLA filament, including printers from:
🔹 Bambu Lab
🔹 Creality
🔹 Prusa Research
🔹 Anycubic
🔹 ELEGOO
🔹 Suitable for open and enclosed printers. eSUN recommends keeping the enclosure open when printing PLA to avoid excessive chamber temperature.
⚙️ Printing Settings
🔹 Nozzle Temperature: 190–230°C
🔹 Build Surface Temperature: 45–60°C
🔹 Fan Speed: 100%
🔹 Printing Speed: under 200 mm/s
💡 Recommendations and Conditions of Use
🔹 TDS Drying Preparation: 50°C for more than 8 hours.
🔹 Keep the filament dry and protected from moisture after opening to help maintain stable extrusion and matte surface quality.
🔹 PLA-Matte is softer than some other filaments; avoid excessive extruder tension.
🔗 Filament Storage Bags and Moisture Control Silica
📊 Technical Specifications
🔹 Density: 1.329 g/cm³
🔹 Melt Flow Index MFI: 5.8 g/10min at 190°C and 2.16kg
🔹 Heat Distortion Temperature HDT: 51°C at 0.45 MPa
🔹 Tensile Strength XY: 25.976 MPa
🔹 Tensile Strength Z: 14.31 MPa
🔹 Elongation at Break XY: 7.23%
🔹 Elongation at Break Z: 2.26%
🔹 Flexural Strength XY: 42.6 MPa
🔹 Flexural Strength Z: 21.1 MPa
🔹 Flexural Modulus XY: 2249.05 MPa
🔹 Flexural Modulus Z: 1782.62 MPa
🔹 IZOD Impact Strength XY: 4.7 kJ/m²
🔹 IZOD Impact Strength Z: 2.15 kJ/m²
🧩 Applications
🔹 Decoration and artistic models
🔹 Cosplay
🔹 Cultural and creative toys and models
🔹 Early concept models and rapid prototyping
🔹 Large models benefiting from a matte surface finish
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
