eSUN PLA-Silk Jacinth 3D Printing Filament 1.75mm 1kg
89ر.س
Product description
eSUN PLA-Silk Jacinth is a glossy PLA 3D printing filament for FDM printers, supplied in a 1.75mm diameter and 1kg net-weight spool. Its distinctive jacinth-colored finish produces smooth, silky reflections while helping to minimize visible layer lines in artistic models, decorations, and display pieces.
⭐ eSUN PLA-Silk combines a silky gloss, attractive appearance, easy printing, and a smooth surface finish, with easy support removal and a refined printed appearance.
Compatible with FDM printers supporting PLA, 1.75mm filament, and nozzle temperatures up to 230°C, including suitable printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS Lite, AMS 2 Pro, and AMS HT support suitable PLA materials subject to system-specific restrictions, spool dimensions, and third-party filament settings; compatibility with this particular series is not automatically established.
🔹 Creality: CFS and CFS Lite support PLA, subject to spool dimensions and printer compatibility.
🔹 Anycubic: Anycubic does not recommend third-party PLA Silk, including brands such as eSUN, inside ACE Pro or ACE 2 Pro.
🔹 Prusa: MMU3 supports PLA, subject to suitable feeding conditions and print settings.
📦 Product Information
🔹 Brand: eSUN.
🔹 Product: PLA-Silk.
🔹 Material: PLA.
🔹 Color: Jacinth.
🔹 Color Groups: Red.
🔹 Filament Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Silk Jacinth?
🔹 Silky gloss produces attractive light reflections across printed surfaces.
🔹 Smooth finish helps minimize the visibility of layer lines while highlighting model details.
🔹 PLA-like ease of printing with relatively easy support removal.
🔹 In the actual product photos, Jacinth appears as a bright reddish-orange shade with warm, gemstone-like reflections under the lighting.
🔹 Suitable for artistic and decorative prints where color and surface appearance are key design features.
⚙️ Recommended Printing Settings
🔹 Nozzle Temperature: 190–230°C.
🔹 Bed Temperature: 45–60°C.
🔹 Cooling Fan: 100%.
🔹 Printing Speed: Below 200 mm/s.
🔹 Nozzle Sizes Listed in TDS: 0.2, 0.4, 0.6, and 0.8mm.
🔹 Build Surface Listed in TDS: Heated PEI build plate.
🔹 Adjust settings according to the printer, model geometry, and desired surface finish.
💡 Printing and Storage Recommendations
🔹 Reduce outer-wall speed to enhance the silky gloss.
🔹 The TDS specifies drying preparation at 50°C for more than 8 hours.
🔹 Keep the spool sealed and away from moisture and direct heat.
🔹 Optimize seam positions and travel paths to reduce visible marks on printed surfaces.
🔹 Explore CubicSky filament storage and drying accessories.
📊 Technical Specifications
🔹 Density: 1.21 g/cm³.
🔹 Melt Flow Index (MFI): 4.8 g/10min at 190°C / 2.16kg.
🔹 Heat Deflection Temperature (HDT): 50°C at 0.45 MPa.
🔹 Tensile Strength XY: 32.53 MPa.
🔹 Tensile Strength Z: 17.36 MPa.
🔹 Elongation at Break XY: 11.65%.
🔹 Elongation at Break Z: 1.84%.
🔹 Flexural Strength XY: 44.4 MPa.
🔹 Flexural Strength Z: 23.1 MPa.
🔹 Flexural Modulus XY: 1917.35 MPa.
🔹 Flexural Modulus Z: 1858.86 MPa.
🔹 IZOD Impact Strength XY: 2.93 kJ/m².
🔹 IZOD Impact Strength Z: 2.19 kJ/m².
🧩 Applications
🔹 Decorative models and artistic sculptures.
🔹 Toys and display models.
🔹 Home decorations and personalized gifts.
🔹 Projects requiring a glossy silk-like finish and distinctive color.
🛡️ Safety and Technical Documents
🔹 A PLA-Silk Safety Data Sheet (SDS) is available with handling, storage, and safety information.
🔹 REACH and RoHS test reports include PLA-Silk among mixed tested material samples, with results limited to the reported sample scope.
🔹 Print in a well-ventilated area and avoid touching hot nozzles or heated build surfaces.
📘 For datasheets, printing settings, and support resources at CubicSky, see: 🔗 3D Printing Materials, Settings, and Technical Support Guide.
📚 Sources
🔗 Official eSUN PLA-Silk Product Page
🔗 Official Technical Data Sheet (TDS)
🎥 Video
