Portable Electric Wire Stripper Cutter 110/220V Enameled Copper Wire Stripping Machine Electric Paint Scraper Knife Repair Tool

Note:
Before scraping the paint, the enameled wire must be slightly straightened by hand to avoid the enameled wire being unable to align with the center of the cutting edge.
When scraping to the end of the enameled wire, please do not immediately make the wire leave the three-jaw cutter head until it stops rotating. So as to avoid the enameled wire suddenly detaching from the cutting edge and damaging the cutting edge during rotation.
How to adjust the speed:
When the enameled wire with different specifications, you can adjust the speed regulating potentiometer. The small wire diameter is adjusted toward the slow speed, and the large wire diameter is adjusted toward the fast direction; when the paint film of the enameled wire is not cleaned off, the speed should be increased until it is cleaned. If the enameled wire is scratched by the stripping machine during speed regulation, the speed should be reduced until it meets the requirements. Please select the most suitable speed according to the above method.

Tips for using:

1. When the enameled wire is of different specifications, the adjustable speed potentiometer can be adjusted. The wire diameter is adjusted in the slow direction, and the wire diameter is adjusted in the fast direction. When the paint film is not peeled off, the speed is increased until it is scraped. If the enameled wire is scratched by a knife during speed regulation, the speed should be reduced until it meets the requirements.
2. When scraping the paint to the end of the enameled wire, do not immediately disengage the three-jaw blade at the end of the enameled wire. The intersection of the cutting edge should wait for the tool to stop rotating and then disengage, so as not to rotate, the enameled wire suddenly breaks off the cutting edge and damages the cutting edge.
3. The shell is made of voltage-resistant plastic material, which is safe and reliable.
4. Before painting, it must be straightened by hand to avoid the enameled wire pair not being centered.
5. After using for a long time, if the power is not available, the safety cover can be unscrewed to remove the peeled paint film powder.

About this item

The DF-8 magnet wire stripper adopts advanced electric paint scraping technology, which takes 2 seconds to remove the insulating paint film on the surface of various enameled wires without damaging the substrate.
This magnet wire stripping machine is composed of an electronic stepless speed regulator, a single-phase series motor and a three-jaw cutter head. It adopts light and micro-point switch and spinning carbon brush.
This enameled wire paint scraper has the remarkable characteristics of fast paint scraping speed, high efficiency, simple operation, stable quality, low failure rate, convenient carrying and storage, and novel design.
It is a small, easy-to-use and hand-held magnet wire paint scraping tool. Compared with manual wire stripping, this tool can save a lot of time and strip more cleanly. It is a necessary tool to strip magnet wire.
It is a paint scraping tool for coil manufacturing and maintenance industries such as motors, electrical appliances, meters, transformers, electronics, household appliances and power tools.

How to adjust the speed:

When the enameled wire with different specifications, you can adjust the speed regulating potentiometer. The small wire diameter is adjusted toward the slow speed, and the large wire diameter is adjusted toward the fast direction; when the paint film of the enameled wire is not cleaned off, the speed should be increased until it is cleaned. If the enameled wire is scratched by the stripping machine during speed regulation, the speed should be reduced until it meets the requirements. Please select the most suitable speed according to the above method.

Package includes:

1* Handheld magnet wire stripping machine
1* User manual