Aluminum Horn

Information about the trumpet, its features and characteristics:

1- The horns are characterized by the complete collection of the reflected beam from the surface of the dish to the receiver and its complete transmission to the horizontal and vertical needles of the receiver.

2- The horns increase the signal by at least 4 to 5 degrees and sometimes 6 full degrees.

The pickup rings must be 1 cm longer than the first ring inside the neck of the horn. It is preferable not to cut the pickup rings and leave them as they are.

The receiver must be mounted inside the horn neck in equal proportions inside the horn, not tilted to the left or right or up or down, and directed to the focal area and in full, and to maintain the appropriate focal length for the size of the dish. The horn must be fixed well to the receiver and not tilted in any direction. When the appropriate position for the horn and receiver is reached, it must be fixed well with tape so that it does not tilt in any direction.

Suitable for oval and flat dishes from 60 cm and above

Horn hole diameter 15.5cm

Small hole diameter: 5.55cm

Silver trumpet made of aluminum