1 piece 160/240 ml PPSU baby feeding bottle with double handle baby drop protector child milk bottle wide-neck newborn bottle used for feeding BPA free

Product guide information: features: 1. The bottle body is made of imported PPSU (polyphenylsulfone) material and does not contain bisphenol A. 2. Resistant to high temperatures of 180°C, safe and odorless, high light permeability 3. The nipple is made of food-grade liquid silicone, ultra-soft and stretchable. It is anti-colic and the nipple is absorbed at the same time, allowing the baby to suck milk at the same time without inhaling too much air to prevent bloating. 4. Uses imported ink from the German company Malebao, which is safe, non-toxic, and free of heavy metals. Wide diameter design, easy to pour milk powder, smooth inner wall, easy to clean, not easily sticky with dirt, quick heat transfer, not easy to explode. product grains: 1. When cleaning, if there are any milk residues, pour them out first and rinse with water. It is recommended to use the Aidoqi bottle cleaning set to clean the bottle, nipple/spout, and other parts. 4. Suitable for steam sterilization and boiling for 2-3 minutes (avoid contact with the bottom and wall of the container during boiling). After cleaning and sterilizing, place in a well-ventilated place until dry and stored. The bottle should remain in a clean and healthy place and should not be near fire sources or heat sources, and avoid direct sunlight. For your child's safety and health, warning! This product must be used under adult supervision. 5. Straws are not suitable for children under 6 months. Check the temperature of the food before feeding, 6. The nipple should not be used as a pacifier. Check before each use and extend the nipple in all directions. If damaged or defective, dispose of it immediately. Clean or sterilize before each use. basic product information handle/thread dust cover made of polypropylene (PP): Germany 180°C GB 4806.7-2016 nipple/straw (LSR) Korea 110°C GB 4806.7-2016 raw materials origin temperature resistance Japan 180°C GB 4806.11-2016 product appearance: unicorn, snake product size: polypropylene bottle; product capacity: 240 ml 103*69*161 product capacity: 160 ml 103*69*133