DSPPA DSP3011 3-Inch 6W Frameless Ceiling Speaker, 70V/100V
35.22ر.س
Product description
The DSPPA DSP3011 is a compact frameless ceiling speaker with a 3-inch driver, 6W output and a built-in 70V/100V transformer. At 104mm across and 0.5kg, it fits corridors, hotel rooms, offices and small meeting rooms where a 6.5-inch speaker is too big.
====
The DSPPA DSP3011 is a small frameless ceiling speaker with a 3-inch driver, 6W of output and a built-in 70V/100V transformer. Its body measures just 104mm across and 76mm deep, so it fits the ceiling of a narrow corridor, a hotel room or an office where a 6.5-inch speaker will not. Use it for paging and background music on a conventional 100V PA system.
DSPPA DSP3011 specifications
These figures come from DSPPA's official product page and datasheet:
- Driver: 3 inch × 1, paper cone.
- Power: 6W RMS.
- Taps: 1.5W and 3W on 70V lines, 3W and 6W on 100V lines.
- Sensitivity: 88dB ±2dB; max SPL 95dB ±2dB at 1m.
- Frequency response: 120Hz to 20kHz.
- Size: φ104 × 76mm; weight 0.5kg.
Built for tight ceiling space
Hotel and hospital corridors leave little room between light fittings, smoke detectors and AC vents. A 104mm speaker takes up about as much space as a small downlight. The frameless design sits close to the ceiling surface, so it stays discreet in offices and shops with a clean interior.
70V and 100V taps
The internal transformer lets you run many speakers in parallel on one long cable from the amplifier. Pick the tap per room: 3W in a quiet meeting room, 6W in a corridor or waiting area with foot traffic. That way the amplifier's power is shared across more speakers.
Spacing small speakers
A 6W speaker works best when several are spread at short intervals rather than one large speaker in the middle of a corridor. Guests and staff then hear announcements at a similar level everywhere, without a loud spot directly below the speaker. Under low ceilings, space them closer and use the 3W tap.
Installation and materials
Spring clips hold the speaker in a gypsum tile or false ceiling. DSPPA says the engineering plastic housing resists deformation and fading, and the cone is high-quality paper.
Typical uses in Saudi Arabia
- Hotel corridors in Makkah and Madinah: paging and background music from near-invisible speakers.
- Hospitals and clinics: ward corridors and small waiting rooms.
- Schools: indoor corridors on the school PA and bell system.
- Offices and small meeting rooms: low-level sound on the 1.5W or 3W tap.
- Small shops and pharmacies: background music without visible boxes.
Amplifier matching
Any amplifier with a 70V or 100V output will drive it. Add up the taps you set on every speaker and choose an amplifier rated comfortably above the total. For example, 20 speakers on the 6W tap need at least a 120W amplifier.
DSP3011 or DSP3011C?
Both have 6W output, the same taps and the same 0.5kg weight. The DSP3011C adds a back cover and an IPX6 waterproof structure, is larger at ø125 × 93mm, starts its frequency response at 300Hz instead of 120Hz, and has 87dB sensitivity against 88dB. Choose the DSP3011 for dry ceilings and tight spaces, and the DSP3011C for damp areas or where you want the speaker enclosed from behind.
Frequently Asked Questions
How many DSP3011 speakers can a 120W amplifier drive?
Up to 20 speakers on the 6W tap, or 40 on the 3W tap, leaving some headroom in the amplifier.
Can I use the DSP3011 in a bathroom or damp area?
DSPPA does not list water resistance for this model. For damp areas, choose the IPX6-rated DSP3011C.
Specifications
- Model: DSP3011
- Type: Frameless ceiling speaker
- Driver: 3" × 1, paper cone
- Rated power (RMS): 6W
- Rated voltage and taps: 70V: 1.5W/3W; 100V: 3W/6W
- Sensitivity (1m, 1W): 88dB ±2dB
- Max SPL (1m): 95dB ±2dB
- Frequency response: 120Hz to 20kHz
- Dimensions (W × H): φ104 × 76mm
- Net weight: 0.5kg
- Housing: Engineering plastic
- Mounting: Spring clips
Features
- 3-inch driver in a 104mm body: disappears into a false ceiling without crowding the lights in narrow corridors.
- 6W with 70V (1.5W/3W) and 100V (3W/6W) taps: turn it down for quiet rooms and up for busy corridors.
- Built-in 70V/100V transformer: run many speakers on one long line from the amplifier.
- 88dB sensitivity and 95dB max SPL: clear paging at short listening distances.
- Spring-clip mounting and 0.5kg weight: quick, secure fitting in gypsum ceiling tiles.
