DSPPA D7702 Ceiling Array Microphone System with 104 Mics, 8 m Pickup

31003.34

Product description


The DSPPA D7702 is built around the D7702M ceiling array with 104 MEMS microphones and an 8 m pickup radius, which works in DSPPA's system with the D7702P processor and its 4×10 W amplifier. It suits large meeting rooms, training halls and command centers that want clear tables with no desk microphones or cables.

====

The DSPPA D7702 is a ceiling-mounted pickup system for large rooms, so the table stays free of microphones and cables. DSPPA's D7702 system combines two parts: the D7702M ceiling array with 104 MEMS microphones and an optimal 8 m pickup radius, and the 1U D7702P processor and amplifier. DSPPA uses AI processing to cut noise and stop howling, reinforcing the talker inside the room while sending the same audio to remote participants.

DSPPA D7702 key specifications

  • 104 digital MEMS microphones forming hundreds of pickup beams.
  • Optimal 8 m pickup radius and 50 Hz to 22 kHz frequency response.
  • 65 dB echo cancellation and reverberation suppression for rooms with RT60 below 1.5 s.
  • Up to 8 D7702M arrays cascaded over the network.
  • 596 × 596 × 52.5 mm, 4.34 kg, white finish.

AI noise reduction and feedback control

A ceiling mic sits far from the talker's mouth, so processing does the heavy lifting. The D7702 uses deep neural network (DNN) noise reduction against more than 300 noise types, by up to 40 dB, and AI feedback cancellation that allows more than 20 dB of reinforcement gain without howling. You can also define acoustic zones that favor the chair and presenters while pulling sound outside the zone down by 30 dB, so corridor chatter and service staff stay out of the mix.

The D7702P processor and amplifier

The D7702P drives the room loudspeakers directly with 4×10 W or 2×20 W into 4 ohms. It adds two mic inputs and two line inputs at 105 dB SNR, plus two stereo outputs. Amplification delay is under 20 ms and the full chain stays under 70 ms, so voices remain in sync with lip movement. It runs Linux or Android 14 and offers RS422, RS485 and USB for control system integration.

Applications in Saudi Arabia

  • Divisible multipurpose halls.
  • Large boardrooms in Riyadh.
  • University lecture and training halls.
  • Command and control rooms running remote emergency meetings.

Installation and connections

The D7702M mounts in the ceiling or hangs from the included suspension kit, powered by PoE or an adapter. Its connections are USB Type-C, a balanced Phoenix AUX in/out, RS232 and two RJ45 ports. The box holds a remote control, user manual, 1.5 m USB-C cable and a 10 m network cable.

D7702 or the D7700 kit?

The D7702 is a camera-free ceiling array covering 8 m per unit, expandable to 8 units, with in-room voice reinforcement. The D7700 is a 12x camera plus a 12-mic tabletop unit covering 6 m, connected to a PC over USB and expandable with two D7706 mics only. Large rooms that need voice reinforcement suit the D7702; mid-size rooms dedicated to video calls suit the D7700.

Frequently Asked Questions

What is the D7702 pickup range?

An optimal 8 m radius per D7702M array, and up to 8 arrays can be cascaded for bigger rooms.

Can the ceiling array run on PoE?

Yes. DSPPA lists PoE or a power adapter for the D7702M, and a 10 m network cable is in the box.

Specifications

  • Model: D7702
  • D7702M: microphones: 104 digital MEMS elements, hundreds of beams
  • D7702M: pickup: Optimal radius 8 m
  • D7702M: audio: 48 kHz sampling, 50 Hz-22 kHz, SNR 66 dB, sensitivity -37 dBV (94 dB SPL @ 1 kHz)
  • D7702M: voice processing: 300+ noise types reduced up to 40 dB, reverberation suppression RT60 <1.5 s, AEC 65 dB, 30 dB suppression outside acoustic zone
  • D7702M: network / cascade: IP audio, cascade up to 8 units
  • D7702M: interfaces: 1× USB Type-C, 1× 3-pin Phoenix balanced AUX in/out, 1× RS232, 2× RJ45, 1× DC 54 V
  • D7702M: indicators: White LED for normal/identify, red LED for mute
  • D7702M: power: PoE or power adapter
  • D7702M: size, weight, color: 596 × 596 × 52.5 mm, 4.34 kg net, white
  • D7702M: mounting: Ceiling mount or suspended (kit included)
  • D7702M: operating temperature: 0-50°C
  • D7702M: in the box: Remote control, user manual, USB-C cable (1.5 m), RJ45 cable (10 m), suspension kit
  • D7702P: latency: Network speaker output <22 ms, amplification <20 ms, full link <70 ms
  • D7702P: reinforcement gain: >20 dB
  • D7702P: inputs: 2 mic inputs (adjustable gain), 2 line inputs, SNR 105 dB
  • D7702P: outputs: 2 stereo line outputs, SNR 109 dB
  • D7702P: amplifier: 4 × 10 W @ 4 Ω or 2 × 20 W @ 4 Ω
  • D7702P: max consumption: 120 W with PoE and full amplifier load
  • D7702P: interfaces: RS422, RS485, USB-A, USB-C, network ports, line in/out
  • D7702P: OS: Linux (Buildroot) or Android 14
  • D7702P: size, weight: 1U, 330 × 217.3 × 44.5 mm, approx. 2.62 kg
  • D7702P: environment: Operating 0-60°C, storage -20 to 75°C, humidity ≤65%

Features

  • 104 MEMS mics in one ceiling unit: 8 m pickup radius with no microphone in front of each seat.
  • AI noise reduction for 300+ noise types, up to 40 dB: background sounds such as air conditioning are cut before they reach the speakers.
  • Cascade up to 8 units over IP: cover large halls and rooms that split and merge.
  • 4×10 W or 2×20 W amplifier in the D7702P: in-room voice reinforcement with under 20 ms amplification delay.
  • PoE or adapter power: one network cable to the ceiling array keeps cabling simple.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌