DSPPA D5828 Outdoor 8-Channel Antenna Amplifier for Wireless Mics
2936.42ر.س
Product description
The DSPPA D5828 is the outdoor version of DSPPA's 8-output antenna amplification system for wireless microphones. It takes signal from two antennas and splits it across the receivers in your rack, made for school yards, sports fields and open-air stages.
====
The DSPPA D5828 is an antenna amplification and distribution unit for wireless microphones used in large open spaces such as school yards, sports fields and outdoor stages. It takes the signal from two antennas through two BNC inputs and splits it across 8 BNC outputs for your receivers, with 2 extra outputs for cascading. It is the outdoor version of DSPPA's 8-channel model; the indoor version is the D5828C.
DSPPA D5828 specifications
Figures below come from DSPPA's product page and datasheet:
- Frequency range: 400 to 950MHz.
- Inputs: 2 × BNC; outputs: 8 × BNC plus 2 backup.
- Output gain: +1.0dB±1dB; isolation between outputs above 18dB.
- Impedance 50 ohms; antenna feed +8V DC at 200mA.
- Power: 12 to 15V DC, drawing about 200mA.
- Size 482×200×45mm; net weight 1.96kg.
Why use an antenna amplifier?
Every wireless receiver ships with two antennas. Stack several receivers in one rack and the antennas crowd each other, often in a control room far from the yard. With the D5828 you mount a single antenna pair high and in the open, run the signal to the rack by cable, and the unit shares it across every receiver.
The rear panel adds 4 DC outputs at 12V to power the receivers, so the rack needs fewer adapters and sockets. Need more channels? Chain a second unit from the cascade output.
Antenna cables
Antenna cables up to 50m can be ordered from the factory.
Typical uses in Saudi Arabia
- School yards for morning assembly and outdoor broadcasts.
- Sports fields and halls at schools and clubs.
- Outdoor stages at festivals and public events.
- Eid prayer grounds and the outdoor courtyards of large mosques.
Wireless mic compatibility
The 400 to 950MHz range covers the 632 to 695.25MHz band of the DSPPA D5821, D5822 and D5824 kits, whose BNC 50-ohm antenna inputs match the amplifier outputs.
D5828 or D5828C?
Both share the same official spec table: 8 BNC outputs, 400 to 950MHz and a 482×200×45mm chassis. The D5828 is the outdoor version and the D5828C the indoor one. Pick the D5828 for yards and fields, the D5828C for halls.
Frequently Asked Questions
What does the DSPPA D5828 do?
It takes the signal from one antenna pair and splits it to 8 BNC receiver outputs, so the antenna can sit out in the open while receivers stay in the rack.
How long can the antenna cable be?
Antenna cables up to 50m can be ordered from the factory.
Does it work with DSPPA D5821 and D5822 kits?
On paper, yes: its 400 to 950MHz range covers their band, and both sides use 50-ohm BNC connectors.
Specifications
- Model: D5828
- Version: 8-channel, outdoor
- RF signal inputs: 2 × BNC
- Frequency range: 400~950MHz
- Input cutoff point: +32dBm
- Amplified outputs: 8 × BNC + 2 × BNC backup cascade outputs
- RF output gain: +1.0dB±1dB
- Output/input gain: +1.0dB±1dB
- Output isolation: Greater than 18dB at 400~1000MHz
- Impedance: 50Ω
- Antenna output connector: BNC
- Antenna input power feed: +8.0V DC / 200mA
- DC outputs for receivers: 4 × 12V
- Power supply: 12~15V DC
- Current consumption: About 200mA at 12V DC
- Unit dimensions: 482×200×45mm
- Net weight: 1.96kg
- Antenna cables: up to 50m on factory order; loss ≤0.24dB/m
Features
- 2 BNC inputs, 8 BNC outputs plus 2 backup outputs: one antenna pair feeds several receivers instead of antennas on every unit.
- 400 to 950MHz range: covers the 632 to 695.25MHz band used by DSPPA D58 mics.
- 4 DC outputs at 12V: power the receivers from the same unit and cut down on adapters in the rack.
- Antenna cables up to 50m on order: mount the antenna high and in the open, away from the rack.
