DSPPA WH-706 60W 5-Step Volume Controller with 24V Override

84.62

Product description


The DSPPA WH-706 controls a group of speakers on a 100V line, up to 60W in total, through five fixed volume steps. A 24V DC override signal forces the line back to 100V for urgent paging, making it a fit for meeting rooms, hotel restaurants and showrooms.

====

The DSPPA WH-706 is built for spaces with several speakers that need one volume control: a meeting room with six ceiling speakers, a hotel restaurant or a showroom floor. It is rated at 60W on a 100V line, adjusts level through five fixed steps and accepts a 24V DC override signal that pushes the line back to full power for urgent announcements.

DSPPA WH-706 power rating and volume steps

Instead of an open-ended knob, the WH-706 gives you five steps with voltages published in DSPPA's datasheet, measured at 1kHz on a 100V line into an 82Ω load with under 1% distortion:

  • Step 0: off (0V).
  • Step 1: about 13V ±2V.
  • Step 2: about 26V ±2V.
  • Step 3: about 51V ±2V.
  • Step 4: full 100V line.

Frequency response on steps 1 to 3 is 70Hz to 18kHz at -3dB, so speech stays intelligible after you turn it down.

24V override and alarm linkage

DSPPA designed this controller for fire alarm linkage. When a 24V DC, 10mA signal arrives from the alarm panel or the PA controller, the line goes to 100V regardless of the switch position. Someone may have silenced the meeting room, but they will still hear the evacuation message.

How many speakers can one WH-706 drive?

Add up the tap settings of every speaker on the controller and stay at or below 60W. Some examples:

  • Ten ceiling speakers tapped at 6W = 60W.
  • Six speakers tapped at 10W, such as the DSP5211C = 60W.
  • Four 10W wall speakers plus two 6W ceiling speakers = 52W.

Over 60W, move up to the WH-712 or split the speakers across two controllers.

Where the WH-706 fits in Saudi projects

DSPPA lists hotels, office cabins, showrooms and greenrooms. Local examples:

  • Meeting rooms in Riyadh and Jeddah offices: background audio drops during meetings.
  • Hotel restaurants and lobbies in Makkah and Madinah: a fixed level per zone.
  • Car and furniture showrooms: quiet music in one area, sales paging in another.
  • School labs and libraries: lower everyday audio while urgent assembly announcements still play.

Compatibility

The WH-706 works with DSPPA wall and ceiling speakers fitted with 100V line transformers and with any 100V amplifier, such as the MP120UB.

In a zoned building fed by a multi-zone amplifier, put a controller on the line of each room that needs local control, and leave corridors and emergency-only lines without one so they always play at full level.

WH-706 or WH-712?

DSPPA covers both models in one datasheet, and the only difference is rated power: 60W for the WH-706 and 120W for the WH-712. The five steps and their voltages, the 24V DC override and the frequency response are identical. Choose the WH-706 for speaker loads up to 60W and the WH-712 for larger zones.

Frequently Asked Questions

What is the difference between the WH-706 and WH-712?

Only the power rating: 60W on the WH-706 and 120W on the WH-712. Every other datasheet value is the same.

Does the override work without an alarm panel?

The override needs a 24V DC, 10mA signal from an alarm panel or a PA unit with a 24V output. Without it, the WH-706 works as a normal five-step volume control.

Can I use it on a 70V amplifier?

The published specifications list a 100V line only, so do not use it on a 70V system before confirming with DSPPA.

Specifications

  • Model: WH-706
  • Series: WH-706 / WH-712 high-power volume controllers with 24V override
  • Type: Five-step volume control
  • Rated power: 60W
  • Override signal: 24V DC, 10mA
  • Output per step: Step 0: 0V (off); Step 1: 13V ±2V; Step 2: 26V ±2V; Step 3: 51V ±2V; Step 4: 100V
  • Output test conditions: 1kHz at 100V line, 82Ω load, distortion below 1%
  • Frequency response (-3dB): 70Hz to 18kHz on steps 1 to 3
  • Override output: With a 24V DC override signal the line outputs 100V whatever the switch position
  • Compatible speakers: DSPPA wall and ceiling speakers with 100V line transformers

Features

  • 60W rated power: enough for, say, ten ceiling speakers tapped at 6W on one controller.
  • Five fixed steps (0, 13, 26, 51 and 100V): every room sits at a known, repeatable level.
  • 24V DC, 10mA override: link it to the alarm or paging system and announcements play at full line voltage.
  • 70Hz to 18kHz response on steps 1 to 3: speech stays clear after turning it down.
  • Built for DSPPA wall and ceiling speakers with 100V transformers: drops straight into existing systems.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌