DSPPA MP600PIII 250W Mixer Amplifier with 3 Mic and 2 AUX Inputs

1258.08

Product description


The DSPPA MP600PIII is a 250W mixer amplifier that combines 3 microphone inputs and 2 AUX inputs in one chassis, with 70V/100V and P1 outputs. It suits mosques, schools and event halls that need a mixer and an amplifier together without extra equipment.

====

The DSPPA MP600PIII puts a small mixer and a 250W amplifier in one chassis. Plug in three microphones and two audio sources, then wire the speakers straight to its 100V or 70V output with nothing in between. That layout works well for a mid-size mosque, a school or an event hall that wants a system anyone on staff can run.

DSPPA MP600PIII power and inputs

The unit belongs to DSPPA's Classical Series, which runs from the 60W MP200PIII up to the 350W MP1000PIII. The MP600PIII sits in the middle at 250W.

  • 3 microphone inputs: MIC1 on the front, MIC2 and MIC3 on the rear.
  • 2 AUX inputs for a player, phone or PC, plus 1 AUX output.
  • 70V and 100V constant-voltage output and a P1 low-impedance output.
  • Frequency response of 80 Hz to 16 kHz; distortion of 1% or lower.
  • Rated consumption of 500W on 220V/50Hz.

MIC1 priority for announcements

MIC1 is the priority input. When someone speaks into it, the other sources drop automatically by up to 30 dB, and a mute control on the rear panel governs this function. At a school assembly, for example, the music plays until the supervisor starts talking, and nobody has to reach for the music knob.

Separate control for every source

Each microphone and each AUX input has its own level knob. Bass (100 Hz) and treble (10 kHz) controls each offer ±10 dB. A little less bass reduces boom in echoing halls, while a touch more treble keeps speech clear on distant speakers. A 5-segment LED meter shows when the signal is close to clipping.

Where the MP600PIII fits in Saudi Arabia

  • Mosques: imam mic, pulpit or lesson mic and a wireless mic receiver, feeding ceiling speakers in the prayer hall.
  • Schools: morning assembly broadcasts in the yard, with music from a player on AUX.
  • Event halls and private istirahas: speeches and welcomes over background music.
  • Large shops and showrooms: customer announcements above the music.

Wiring and protection

The rear output terminals are COM, P1, 70V and 100V; use only one pair at a time. Protection covers an AC fuse, DC output, overload and short circuit, with an alarm indicator for a shorted output. The AUX output delivers 700 mV or more, ready for an extra amplifier or a recorder. The unit measures 483 x 338 x 88 mm and weighs 13 kg.

MP600PIII or MP1000PIII?

Both share the same chassis, inputs and controls. The difference is power: the MP600PIII is rated 250W and draws 500W, while the MP1000PIII is rated 350W and draws 650W. If your speaker taps add up to more than about 200W, or you plan to add outdoor speakers later, go for the MP1000PIII. Beyond 1000W, a power amplifier such as the MP3000 paired with a preamp is the better route.

Frequently Asked Questions

Is the DSPPA MP600PIII suitable for a mosque?

Yes. It has 3 mic inputs, 2 AUX inputs and a 100V output for ceiling and column speakers, and 250W covers a mid-size mosque depending on speaker count and taps.

Can I connect a wireless microphone?

Yes. Connect the wireless receiver output to one of the mic inputs and set its own level knob.

How does the mic priority work?

When MIC1 is in use, the other inputs duck automatically by up to 30 dB so the speaker is heard above the music.

Specifications

  • Model: MP600PIII
  • Type: Classical Series mixer amplifier (MP200PIII/MP300PIII/MP600PIII/MP1000PIII)
  • Rated output power: 250W
  • Output modes: P1 low impedance + 70V/100V constant voltage
  • Output terminals: COM, P1, 70V, 100V (use one pair at a time)
  • Output voltage regulation: ≤3 dB (full load to no load)
  • Mic inputs: 3 (MIC1 on front with priority, MIC2/MIC3 on rear)
  • AUX inputs: 2 (AUX1, AUX2 on rear)
  • AUX output: 1, level ≥700 mV
  • Mic minimum source EMF: ≤3.3 mV (unbalanced)
  • Line minimum source EMF: ≤300 mV (unbalanced)
  • Frequency response: 80 Hz to 16 kHz (±3 dB)
  • THD: ≤1% (1 kHz, normal operation)
  • S/N ratio: Line input ≥74 dB
  • Tone control: Bass ±10 dB (100 Hz), treble ±10 dB (10 kHz)
  • Priority mute: MIC1 ducks other inputs 0 to -30 dB; mute control on rear
  • Indicators: Power LED, 5-segment LED meter, short-circuit alarm
  • Protection: AC fuse, DC output, overload, short circuit
  • Power supply: AC 220V/50Hz
  • Rated power consumption: 500W
  • Unit size (L×W×H): 483×338×88 mm
  • Net weight: 13 kg

Features

  • 250W rated output: runs a 100V speaker network for a mid-size mosque or school from one unit.
  • 3 mic and 2 AUX inputs, each with its own level: imam mic, pulpit mic and a wireless receiver, plus a recitation player.
  • MIC1 priority with 0 to -30 dB ducking of other sources: announcements rise above the music automatically.
  • Bass and treble controls with ±10 dB range: tame boomy halls and sharpen speech.
  • 5-segment LED meter and short-circuit protection with alarm: watch the output level and spot a faulty speaker line at once.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌