Yeastar EX30 Expansion Board with 1 E1/T1/PRI Port
2453.33ر.س
Product description
The Yeastar EX30 adds a single E1/T1/PRI port to the front of a Yeastar PBX. It is aimed at hospitals, hotels and companies that already have an E1 circuit and run a P560 or P570 (or an S100 or S300).
====
The Yeastar EX30 adds one E1/T1/PRI port to a Yeastar PBX, so your provider's digital E1 line lands directly on the phone system without a separate gateway. It fits the front expansion slot of the P560 and P570, as well as the S100 and S300 in the S-Series.
Yeastar EX30 specifications
- Port: one E1/T1/PRI.
- Takes no modules.
- P560: one board, meaning one E1 circuit.
- P570: up to two boards, meaning two E1 circuits.
- S100: up to two boards; the S300 also takes it.
Who needs it
Any site that runs on an E1 circuit and takes heavy inbound traffic on a single number: a hospital booking appointments by phone, a hotel in Makkah, or a service company's call center. Instead of a standalone gateway taking rack space and power, the line becomes part of the PBX itself.
Front-slot installation
Take off the top cover, push out the blank plate from the expansion slot, slide in the EX30 and screw it down. Close the cover and plug in the E1 cable.
EX30 or EX08?
The EX30 handles one digital E1 line. The EX08 carries four modules for analog, BRI and SIM lines instead. The P520 and P550 do not take the EX30; if you own one of them and need E1, use an external gateway such as the Yeastar TE100.
Frequently Asked Questions
Does the EX30 fit a Yeastar P550?
No. It is for the P560, P570, S100 and S300. A P550 needs an external E1 gateway.
How many E1 lines can a P570 handle?
Two, with an EX30 board in each of its two expansion slots.
Does the EX30 need extra modules?
No. The E1 port is on the board itself and works once the board is secured in the slot.
Specifications
- Model: EX30
- Type: Expansion board for E1 trunks
- Ports: 1× E1/T1/PRI
- Modules: Takes no modules
- Compatible P-Series PBXs: P560 (1 board), P570 (up to 2)
- Compatible S-Series PBXs: S100 (up to 2), S300
- Maximum E1 ports: P560: 1, P570: 2
- Installation: Front expansion slot, fixed with screws
Features
- 1 E1/T1/PRI port: terminate a digital E1 line on the PBX with no external gateway.
- No modules required: the board works as soon as it is seated and secured.
- 1 board in a P560, up to 2 in a P570: the P570 can carry two E1 circuits.
- 4 compatible PBXs: P560 and P570 (P-Series), S100 and S300 (S-Series).
