DSPPA MAG6310 IP Network Terminal with 2x15W Amplifier

934.97

Product description


The DSPPA MAG6310 is a compact IP PA terminal that receives the network audio stream and drives two 4-ohm speakers from its own 2x15W amplifier. It suits a classroom, meeting room or small shop, and plays MP3 files from USB or SD even when the server is offline.

====

The DSPPA MAG6310 is the last stop in a DSPPA IP PA system. It pulls the audio stream from the server over the network and drives two speakers through its own 2x15W amplifier. At 132x140x50 mm and 0.6 kg, it goes wherever a network cable reaches: a classroom, a meeting room, a small retail unit. A built-in MP3 player with USB and micro SD lets it play content locally as well.

DSPPA MAG6310 key specifications

  • 2x15W digital amplifier for 4-ohm speakers, with a low-power mode.
  • 16-bit digital audio decoding at up to 48kHz.
  • Two network ports, LAN1 and LAN2.
  • USB flash drive and micro SD card, up to 32GB each.
  • AC 220V, 50Hz power.

Keeps running when the server is offline

Normally the server controls the MAG6310 and feeds it background music, paging and alarm signals. If the link drops, the unit carries on with scheduled tasks stored on its SD card, without the host. For a school this means the class bell still rings in that room even when the control room is unreachable.

Sound quality covers background music, not just paging: 25Hz to 20kHz response on MP3 playback, at least 70dB signal-to-noise and no more than 0.5% distortion. DSPPA recommends 20 to 22 AWG speaker wire.

Inputs, outputs and what they are for

  • AUX IN, 350mV: a local source such as a DVD player.
  • MIC, 3.5mV: a microphone for local paging or a teacher's voice.
  • AUX OUT, 1000mV: feeds an external amplifier when you need more power.
  • EMC emergency output controlled by the host, plus a short-circuit output.

The two LAN ports let you connect to a switch or pass the network on to the next unit in a daisy chain. The DATA port is for expansion devices only; DSPPA warns that plugging it into a switch can damage the unit.

Room-level control with the IR remote

A digital display shows operating status, and the unit takes an infrared remote. From the remote you can set the IP address, pick a source (AUX IN, MIC or MP3) and adjust its level, step bass and treble from 0 to 15, and start or stop USB playback.

Where it fits in Saudi projects

  • School classrooms and labs: assembly broadcasts and bells, with a mic for the teacher.
  • Clinic waiting areas: soft music and calls from reception.
  • Small shops and cafes: music from a USB stick plus messages from a head-office server.
  • Office meeting rooms.

MAG6310 or MAG6701?

It comes down to the speakers. The MAG6310 delivers 2x15W into two 4-ohm speakers, with one mic input, a digital display and a 0.6 kg body. The MAG6701 has a 1x60W amplifier rated into 160 ohms (a 100V line system), two mic inputs, LED indicators, 222x195x56 mm dimensions and 2.35 kg weight. Pick the MAG6701 for 100V speakers or many speakers on one zone. DSPPA's MAG6401, in the same family, offers 2x25W or 1x50W bridged with two mic inputs if you need more power on low-impedance speakers. The MAG6402 is not an amplifier at all; it is a wall control panel.

Frequently Asked Questions

Can the MAG6310 drive 100V speakers?

The datasheet rates it 2x15W into 4-ohm speakers. For a 100V line, feed an external amplifier from AUX OUT or choose the MAG6701.

Does it work without the PA server?

Yes. It plays MP3 files from USB or an SD card up to 32GB and runs scheduled tasks stored on the card.

Can I plug a mic in locally?

Yes. It has a 3.5mV mic input for local paging and an AUX input for a source such as a DVD player.

Specifications

  • Model: MAG6310
  • Type: Simplified network playback terminal with amplifier
  • Built-in amplifier: 2x15W digital into 4 ohm, low-power mode; speaker wire 20 to 22 AWG
  • Audio decoding: 16-bit up to 48kHz
  • Network: LAN1/LAN2, daisy-chain or switch, cross-segment
  • AUX IN: 350mV; 26Hz to 18kHz; THD ≤0.5%; S/N ≥75dB
  • AUX OUT: 1000mV; 25Hz to 20kHz; THD ≤0.3%; S/N ≥75dB
  • MIC IN: 3.5mV; 30Hz to 18kHz; THD ≤0.5%; S/N ≥65dB
  • USB/SD/NET MP3 playback: 25Hz to 20kHz; THD ≤0.5%; S/N ≥70dB
  • SD card / USB capacity: 32GB / 32GB
  • Control outputs: EMC emergency output (host-controlled), short-circuit output
  • DATA port: For expansion devices; do not connect to a switch
  • Display: Digital status display
  • Remote control: Infrared remote
  • Power supply: AC 220V / 50Hz (DC +15V input shown on panel diagram)
  • Unit dimensions (L×W×H): 132×140×50 mm
  • Net weight: 0.6 kg

Features

  • Built-in 2x15W digital amplifier for 4-ohm speakers: wire two speakers straight in, no separate amp needed.
  • Dual LAN ports (LAN1/LAN2): daisy-chain units or connect to a switch, with cross-segment operation.
  • MP3 player with USB and micro SD up to 32GB: runs scheduled tasks and keeps playing if the server drops.
  • 3.5mV mic input and 350mV AUX input: local paging from the room or a source such as a DVD player.
  • 16-bit, 48kHz audio decoding and IR remote: set volume, bass, treble and the IP address from the room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌