Uniview UAC-B128-ADF28MS 8MP LightHunter Analog Bullet, 40m IR

The Uniview UAC-B128-ADF28MS is an 8MP (3840×2160) LightHunter bullet camera with two IR LEDs reaching 40 meters, 120dB WDR and a metal IP67 housing. It suits warehouses, parking areas and perimeters that want 4K detail without switching to IP cameras.

====

The Uniview UAC-B128-ADF28MS carries 8MP (4K, 3840×2160) over ordinary coax, so you can upgrade an aging CCTV system without pulling new network cable. It is a metal-bodied LightHunter bullet camera with two IR LEDs reaching 40 meters, 120dB WDR, a built-in microphone and a 2.8mm lens covering 109.1° horizontally.

Uniview UAC-B128-ADF28MS specifications

• Resolution: 8MP, 1/2.7" CMOS, 4K at 15fps.
• Sensitivity: 0.005 lux at F1.6, 0 lux with IR.
• Night vision: two IR LEDs, 40m range, Smart IR.
• Image: 120dB WDR and 2D/3D noise reduction.
• Housing: metal, IP67, 300g.
• Power: 4.8W maximum on 12V DC.

What 4K over coax gets you

More pixels in the same scene means that when you zoom into footage to check a face or a plate at the edge of the frame, the detail holds up better than on a 5MP camera with a similar view. Because it runs on coax, you replace the cameras and recorder and keep the cabling. Note that 4K runs at 15fps; for smoother motion you can drop to 4MP at 25 or 30fps.

Night vision out to 40 meters

Two IR LEDs reach 40 meters, twice the range of 5MP models such as the UAC-B115-AF28. That matters in open yards, parking lots and warehouse perimeters, where the far side of the scene sits well away from the camera. With 0.005 lux sensitivity, color images stay usable under weak lighting before IR kicks in.

120dB WDR for bright entrances

A warehouse door open to noon sun or a glass showroom entrance usually leaves faces in shadow. True 120dB WDR balances bright and dark areas together, a step up from the digital DWDR on the 5MP models. 3D DNR cuts night-time noise as well.

Typical Saudi installations

• Warehouses and wide loading yards.
• Parking at shopping centers and residential buildings.
• Factory and farm perimeters.
• Showrooms and halls with glass frontage.

Recorder compatibility

You need a DVR or XVR that accepts 8MP over TVI, AHD or CVI. Recorders capped at 5MP will run it at a lower resolution. Keep in mind that 8MP recording fills a hard drive faster than 5MP, so size the disk for your camera count and retention days.

Installation and power

The camera runs on 12V DC through a 5.5mm jack and draws up to 4.8W, so pick a supply rated for that per camera. The metal housing measures 157 × 67 × 66 mm and fits corner or pole mounts with the right accessory. With 4kV surge protection and a -30°C to 60°C rating, it is ready for exposed fences and rooftops.

ADF28MS or ADF40MS?

Both share the 8MP sensor, 40m IR, metal housing and microphone. The difference is the lens: the ADF28MS uses 2.8mm with a 109.1° view for wide areas, while the UAC-B128-ADF40MS uses 4.0mm with an 86.8° view for more detail down corridors and at gates.

Frequently Asked Questions

Will the UAC-B128-ADF28MS run at 8MP on any DVR?

Only on recorders that accept 8MP over TVI, AHD or CVI. Recorders limited to 5MP will run it at lower resolution.

How far does the night vision reach?

Up to 40 meters with two IR LEDs, in black and white.

Is the housing metal or plastic?

Metal, rated IP67, weighing 300g and rated from -30°C to 60°C.

Specifications

• Model: UAC-B128-ADF28MS
• Type: 8MP LightHunter Fixed IR Bullet Analog Camera
• Series: Whale Series
• Sensor: 8MP, 1/2.7" CMOS
• Min. illumination: 0.005 lux (F1.6, AGC ON); 0 lux with IR on
• Shutter time: PAL: 1/25 s to 1/50,000 s; NTSC: 1/30 s to 1/50,000 s
• Lens: 2.8 mm fixed, M12 mount
• Angle of view: H 109.1°, V 61.0°, D 126.7°
• Illuminator: 2 IR LEDs, 40 m range, lifetime ≥60,000 h
• Smart IR: Supported
• Exposure modes: Global (default), BLC, HLC, WDR
• Day/Night: Auto (default), Day, Night
• Noise reduction: 2D/3D
• White balance: Auto (default), Manual
• WDR: 120 dB
• Flip: 180° horizontal, 180° vertical
• Digital defog: N/A
• Resolution: 4K: 3840×2160; 5MP@20fps: 2592×1944; 4MP: 2560×1440
• Frame rate (TVI/AHD): 4K@15fps, 5MP@20fps, 4MP@25/30fps
• Frame rate (CVI): 4K@15fps (default), 5MP@20fps, 4MP@25/30fps
• CVBS: PAL, NTSC
• Built-in mic: Supported
• Power interface: 5.5 mm power connector
• Video output: BNC, TVI/AHD/CVI/CVBS
• Power: DC 12 V ±25%
• Power consumption: Max 4.8 W
• OSD languages: 11 languages: English, German, Spanish (Latin America), French, Italian, Japanese, Korean, Polish, Portuguese (Brazil), Russian, Turkish
• Mounting: Corner mount, pole mount
• Dimensions: 157 × 67 × 66 mm (L×W×H)
• Housing: Metal
• Weight: 300 g (0.67 lb)
• Operating temperature: -30°C to 60°C (-22°F to 140°F)
• Humidity: ≤95% RH, non-condensing
• Surge protection: 4kV power, 4kV video output
• Ingress protection: IP67 (IEC 60529)
• EMC: CE-EMC (EN 55032, EN 61000-3-3, EN IEC 61000-3-2, EN 55035), FCC Part 15 Class B
• Safety: CE-LVD (EN 62368-1)
• Environmental: CE-RoHS (2011/65/EU; (EU) 2015/863), WEEE (2012/19/EU)

Features

• 8MP at 3840×2160: zoom into recordings and read details that 5MP cameras blur.
• Two IR LEDs reaching 40m: double the night range of the 5MP models in this family.
• 120dB true WDR plus 2D/3D noise reduction: balanced bright entrances and cleaner night video.
• Metal IP67 housing, 300g: built for exposed sun and dust.
• Built-in mic and 0.005 lux at F1.6: audio with video and better low-light performance.