DSPPA MAG6812F 4x120W Four-Channel IP Network Amplifier, 2U
4429.48ر.س
Product description
The DSPPA MAG6812F packs four 120W 100V amplifier channels into one 2U rack unit, with a LAN port, SD slot and mic input for each channel. It suits buildings split into four PA zones, such as schools, compounds and large mosques.
====
The DSPPA MAG6812F combines four 120W amplifier channels for 100V speaker lines in a single 2U rack unit, so one box delivers 480W across four zones. Every channel gets its own LAN port, Micro SD slot, mic input and EMC output. It is a good match for buildings split into several PA zones, such as large schools, compounds and big mosques.
DSPPA MAG6812F specifications
- Output: 4 × 120W at 100V; 620W rated consumption.
- Network: 4 RJ45 ports (LAN1 to LAN4), no daisy-chain support.
- Sources: 4 AUX inputs (330 mV), 4 mic inputs (5 mV or 100 mV), 4 Micro SD slots up to 32GB.
- Outputs: four 100V channels, 4 AUX OUT at 1000 mV, 4 EMC outputs (24V at 1A and a 1A dry contact).
- Performance: 80 dB SNR on AUX and network playback; 80 Hz to 15 kHz on the 100V outputs.
- Size and weight: 483 × 420 × 88 mm, 8.8 kg net.
Four zones, two rack units
Instead of four 1U amplifiers with four power leads, you install one 2U unit and patch it to four switch ports. The front panel shows four groups of LEDs, one per channel, covering the server link, schedule mode, signal, clipping and protection. A technician can spot the faulty zone at a glance.
Wired or wireless mics per zone
A rear DIP switch sets each mic input to 5 mV for dynamic or electret mics, or 100 mV for wireless receivers and intercom units. AUX level knobs and mic volume buttons sit on the rear panel. The unit also accepts the 100V output of another amplifier as a backup source, and an optional parallel attachment merges two identical backup feeds into one connection.
Browser setup and offline schedules
A password-protected web interface covers language (Chinese or English), standby mode, offline scheduled playback, the 100V backup function and source priority between AUX, mic and network. Sources at the same priority are mixed; lower-priority sources are muted by default. Schedules live on the SD cards, so programs keep running if the server link drops. Power input is AC 220 to 240V at 50 or 60 Hz, with over-current, over-heat and over-voltage protection.
Saudi use cases
- Schools: classrooms, courtyard, prayer hall and sports hall, one channel each.
- Large mosques within compounds: main prayer hall, women's section, outdoor courtyards and ablution areas.
- Malls: corridors, car parks and the food court.
MAG6812F or four MAG6812 units?
Power per zone is the same, 120W. The MAG6812F saves rack space (2U instead of 4U) and adds a web interface and a mic sensitivity switch. It does not, however, support the hand-in-hand chaining found on the MAG6812. For more power per zone, the MAG6835F offers 4 × 350W with 1720W consumption.
Frequently Asked Questions
How many zones does the DSPPA MAG6812F cover?
Four channels at 120W each on 100V lines, each with its own LAN port and SD slot.
Can I connect a wireless microphone?
Yes. Set the mic input to 100 mV with the DIP switch to match a wireless receiver.
How much rack space does it take?
2U, measuring 483 × 420 × 88 mm, with 8.8 kg net weight.
Specifications
- Model: MAG6812F
- Type: Four-channel network digital amplifier
- Mounting and chassis: 2U rack; silver anodized aluminum front panel, gray iron chassis
- Rated output power: 4 × 120W at 100V
- Rated power consumption: 620W
- Network: 4× RJ45 (LAN1-LAN4), no daisy-chain; line-fault detection with automatic switching
- AUX IN: 4 inputs, 330 mV ±50 mV, 80 Hz - 15 kHz, THD ≤1%, SNR ≥80 dB (A-weighted)
- AUX OUT: 4 outputs, 1000 mV ±100 mV
- MIC input: 4 inputs, 5 mV ±1 mV or 100 mV ±10 mV via DIP switch, 80 Hz - 10 kHz, THD ≤1%, SNR ≥75 dB (A-weighted)
- SD / network playback: 80 Hz - 15 kHz (±3 dB), THD ≤1%, SNR ≥80 dB
- 100V output: 4 channels, 80 Hz - 15 kHz, THD ≤1%, SNR ≥75 dB (A-weighted)
- 100V backup input: External 100V input from another amplifier; optional backup parallel attachment
- Terminals: 100V output and backup on an 8-pin 7.62 mm barrier terminal block
- EMC override outputs: 4 outputs; 24V-COM at 1A, SC-COM 1A dry contact
- SD cards: 4× Micro SD up to 32GB for offline scheduled playback
- Decoding: MP3, WMA, WAV, PCM up to 48 kHz / 16-bit
- Level controls: AUX volume knobs (1-2, 3-4) and MIC volume buttons on the rear panel
- Front indicators: 4 groups (one per channel): Net, Timing, Signal, CLIP, PROT, plus Power
- Web interface: Language (Chinese/English), login password, offline schedule, standby mode, 100V backup, AUX/MIC/network priority
- Broadcast classes: Background, business, emergency
- Power supply: AC 220 - 240V, 50/60 Hz
- Protection: Over-current, over-heat, over-voltage
- Net weight: 8.8 kg
- Unit dimensions: 483 × 420 × 88 mm
Features
- 4 × 120W at 100V in 2U: four PA zones in half the rack space of four 1U amplifiers.
- 4 RJ45 ports and 4 Micro SD slots: a network port per channel and cards for offline scheduled playback.
- 4 mic inputs switchable between 5 mV and 100 mV: wired mics or wireless receivers per zone.
- 100V backup input from another amplifier: zones stay covered when you need an alternate source.
- Password-protected web interface: set priorities, standby mode and offline schedules from a browser.
