Huawei OSX010000 10G SFP+ Single-mode Module, 10km Reach
1163.80ر.س
Product description
The Huawei OSX010000 is a 10GBASE-LR SFP+ optic that carries 10G over 1310nm single-mode fiber for 10km. Use it to join separate buildings on a compound, campus or industrial site at full 10G speed.
====
The Huawei OSX010000 is the optic to reach for when buildings sit too far apart for multi-mode fiber: 10G over single-mode fiber for 10km. It follows the 10GBASE-LR standard at 1310nm, is documented in Huawei enterprise hardware guides and also appears in the Huawei eKit optical module datasheet.
Huawei OSX010000 optical figures
- Transmit power: -8.2 to 0.5 dBm.
- Receiver sensitivity: -12.6 dBm (OMA); overload 0.5 dBm.
- Operating temperature: 0 to 70°C, with DDM support.
10G across a campus
On a Riyadh residential compound or a multi-building university, run single-mode fiber from the main network room to each building and fit an OSX010000 at both ends in a 10GE SFP+ port. Each building gets a full 10G link anywhere within 10km.
OSX010000, OMXD30000 or OGSC10DD0?
The OSX010000 and OMXD30000 both run 10G, but the OSX010000 uses 1310nm single-mode for up to 10km while the OMXD30000 uses 850nm multi-mode for up to 400m indoors. The OGSC10DD0 covers the same 10km on single-mode at only 1.25Gb/s and is rated industrial.
Frequently Asked Questions
Do I need an OSX010000 at both ends?
Yes. Each end of the link needs a 10GBASE-LR optic, with single-mode fiber in between.
Will the OSX010000 work on multi-mode fiber?
No. Huawei specifies it for G.652 single-mode fiber. For 10G on multi-mode, use the OMXD30000.
What temperature range is it rated for?
0 to 70°C per Huawei documentation, so keep it in network rooms and enclosed cabinets rather than sun-exposed boxes.
Specifications
- Model: OSX010000
- Form factor: SFP+
- Standard: 10GBASE-LR
- Data rate: 10Gbit/s
- Center wavelength: 1310nm
- Fiber type: Single-mode (SMF)
- Reach: 10 km on G.652 (9μm)
- Connector: LC/DLC
- Ferrule end face: PC or UPC
- Tx power (AVG): -8.2 to 0.5 dBm
- Min. extinction ratio: 3.5 dB
- Rx sensitivity (OMA): -12.6 dBm
- Overload power (AVG): 0.5 dBm
- Operating case temperature: 0 to 70°C (32 to 158°F)
- DDM: Supported
- Product line: Documented in Huawei enterprise hardware docs and listed in the Huawei eKit datasheet
Features
- 10G over 10km of G.652 single-mode fiber: campus buildings linked at core-switch speed.
- -12.6 dBm Rx sensitivity and -8.2 to 0.5 dBm Tx power: clear numbers for link-budget planning.
- 0 to 70°C rating with DDM: keep an eye on the link from the switch interface.
- LC/DLC connector, PC or UPC ferrule: fits standard single-mode patch cords.
